Electronics Classified Ads in USA

The Carrier HF26BB030S Non-Spring Return (NSR) Actuator is an HVAC control component designed to regulate dampers and valves in air-handling and ventilation systems. It operates by converting an electrical control signal into mechanical rotation,...

MRCOOL DIYCOUPLER-3858K75 Line Set Coupler Kit is designed to connect compatible 3/8-inch and 5/8-inch refrigerant line sets in ductless mini-split HVAC installations. The coupler creates a secure connection between line set sections, supporting ...

The Nordyne 920916A 2-Stage Control Board G7 is a replacement electronic control board designed for compatible Nordyne HVAC systems. It manages and coordinates key heating system functions, including two-stage heating operation, by processing the...

Yaskawa CIMR-VU4A0009FAA 5HP Variable Frequency Drive is an electronic motor controller designed to regulate the speed and torque of compatible three-phase HVAC motors. Rated at 8.8A and 380–480V, it adjusts the motor’s frequency and ...

The Crown Engineering EC20420 Eclipse Extension Rod is an HVAC component designed to extend the reach of compatible Eclipse system controls or operating mechanisms. It provides a secure connection between the control point and the equipment, allo...

The First Company 9-315-4-4 8kW Heater is an electric heating component designed for compatible First Company air handlers and HVAC systems. Operating at 240V, it uses electric resistance elements to convert electrical energy into heat, which is ...

The Lochinvar & A.O. Smith 100368388 Natural Gas Pilot Assembly Kit with Tube is an OEM replacement component designed for compatible natural gas water heaters. It works by delivering gas to the pilot burner, creating a controlled flame that ...

The Grundfos 97751533 Valve & Diaphragm Kit is a replacement service component designed for compatible Grundfos SD-S-PV/V/C-1 pressure and water treatment equipment. The kit includes valve and diaphragm components that work together to regula...

The Lennox 27A22 (ECB47-9-P) 9kW Electric Heater Kit is a supplemental electric heating accessory designed for compatible Lennox air handler systems. It works by using electric resistance heating elements to generate heat, which is transferred to...

The Lennox 69W55 2-Stage Pressure Switch is a safety and monitoring component designed for compatible Lennox gas furnaces and HVAC heating systems. It senses pressure changes within the furnace’s combustion or venting system and opens or cl...

The MRCOOL NV35-3834-O No-Vac Pre-Charged Line Set is a 35-foot refrigerant line set designed for compatible MRCOOL mini-split and heat pump HVAC systems using R-454B refrigerant. It connects the indoor air handler to the outdoor condenser, allow...

The Mitsubishi Electric E2230N302 Blower Wheel is a precision-engineered HVAC component designed to move air efficiently through heating and cooling systems. It rotates with the blower motor, drawing air into the unit and distributing it through ...

Stay connected to your vehicles wherever the road takes you. GPSCOTECH offers advanced GPS tracker USA solutions with live location updates, trip history, speeding alerts, geofence notifications, and ignition activity. Keep an eye on your fleet and k...

The MRCOOL DIY25-1438C-O DIY 6K, 9K & 12K BTU Line Set with Pro Cable is a 25-foot refrigerant line set designed for compatible MRCOOL DIY ductless mini-split systems. It features 1/4-inch and 3/8-inch copper lines that connect the indoor air...

The MRCOOL MHK20H Signature Series Air Handler Heat Kit is a 20kW electric heating accessory designed to provide supplemental or primary heat for compatible MRCOOL air handlers. It works by using electric resistance heating elements to warm air a...

The MRCOOL MCAEHFD7X1AA Signature Series Multiposition Air Handler Heat Kit is an electric heating accessory designed for compatible MRCOOL Signature Series multiposition air handlers. It operates by converting electrical energy into heat, which ...

The MRCOOL DIY50-1438C-O DIY 6K, 9K & 12K BTU Line Set with Pro Cable is a 50-foot pre-charged refrigerant line set designed for compatible MRCOOL DIY ductless mini-split systems. It includes 1/4-inch and 3/8-inch copper lines that connect th...

The MRCOOL MCHP51CNPA Signature Series 4 Ton Horizontal Evaporator Coil is a high-performance indoor coil designed for compatible MRCOOL Signature Series air conditioning and heat pump systems. Installed in a horizontal air handler or furnace a...

The MRCOOL MC16-1412 is a 16-foot mini split line set designed for 12,000 to 18,000 BTU ductless HVAC systems. It features 1/4-inch and 1/2-inch copper tubing that connects the indoor air handler to the outdoor condenser, allowing refrigerant to ...

The  MRCOOL DIY25-1412-O DIY 9K, 12K & 18K BTU Mini Split Line Set is a 25-foot pre-charged refrigerant line set designed for compatible MRCOOL DIY ductless mini-split systems. Featuring 1/4-inch and 1/2-inch copper lines, it connects th...

The MRCOOL MHK15H Signature Series Air Handler Heat Kit with Breaker is an electric heating accessory designed for compatible MRCOOL Signature Series air handlers. It provides supplemental heat by converting electrical energy into heat, which is ...

The Navien 30020992B Fan Assembly is a genuine OEM component designed to provide proper airflow for combustion in compatible Navien heating equipment. It is used in select Navien NEFB-C combi boilers and related compatible models. The fan moves c...

The MRCOOL MHK15B Signature Series Modular Blower Heat Kit with Circuit Breaker is an electric heating accessory designed for compatible MRCOOL modular blower and air handler systems. It uses electric resistance elements to generate supplemental ...

The MRCOOL MHK07PB VersaPro Electric Heat Kit is an electric heating accessory designed for compatible VersaPro package HVAC units. It uses electric resistance heating elements to generate supplemental heat and warm conditioned air as it passes t...

The Johnson Controls CD-P1000-00-00U Duct Mount CO2 Transmitter is an HVAC sensing device designed to measure carbon dioxide levels in air ducts and provide an output signal to building control systems. It uses a CO2 sensing element to monitor ai...

The Carrier 349336-762 Inducer Motor Assembly is a replacement component designed for compatible Carrier gas furnaces and heating systems. It operates the inducer fan to establish proper airflow through the heat exchanger and venting system, hel...

The International Comfort Products 17222000A64034 Control Board Assembly Inverter is an OEM electronic control component designed for compatible inverter-driven HVAC systems, including air conditioners and heat pumps. It manages electrical signal...

The Carrier 337677-701 Blower Harness Assembly is a wiring component designed to connect and supply electrical signals between the blower motor and control components in compatible HVAC systems. It helps transmit power and control signals, enabli...

The Carrier 336842-753-CBP Burner Kit is a replacement combustion component designed for compatible Carrier gas furnaces and heating equipment. The burner kit mixes and distributes fuel and combustion air to produce a controlled flame within the ...

The Lennox 24X02 Mini Split Non-Programmable Wired Remote Controller is a wall-mounted control device designed for compatible Lennox mini-split HVAC systems. It connects directly to the indoor unit, allowing users to adjust operating settings suc...

The Viessmann 7841527 Control Console is a replacement control component designed for compatible Viessmann WB1BC 35 gas-fired boiler systems. It interfaces with the boiler’s controls and operating components to manage heating functions base...

The Advanced Distributor Products 76801350 Evaporator Coil is an HVAC heat-transfer component designed for compatible air conditioning and heat pump systems. Installed within an indoor air handler or evaporator assembly, it circulates refrigerant...

The NTI Boiler 6008270801 Hot Surface Ignitor Kit is a replacement ignition component designed for compatible NTI boiler systems. It uses electrical resistance to generate high temperatures, igniting the burner fuel mixture during the heating cyc...

The York S1-6052909 VFD Programmed Controller is a 4.2A variable frequency drive controller designed for compatible York Small Sunline HVAC equipment. It controls motor speed by adjusting the frequency and voltage supplied to the motor, supporti...

The Trane PIP2095 U-Bend Steel Pipe is a durable piping component designed for compatible Trane HVAC and refrigeration equipment. Its U-shaped configuration provides a practical connection between piping sections while accommodating changes in di...

The MRCOOL MVPHK20 VersaPro 2nd Gen Heat Kit is a 20 kW electric heating accessory designed for compatible VersaPro air-handler systems using R-454B refrigerant. It operates through electric resistance heating elements that generate supplemental ...

The MRCOOL MHK20U Universal Air Handler Heat Strip is a 20 kW electric heating accessory designed to provide supplemental heat for compatible air-handler systems. It works by using electric resistance heating elements to generate heat, which is d...

The Trane VAL18892 Expansion Valve is a precision refrigerant control component designed for compatible Trane HVAC systems. It regulates the flow of liquid refrigerant entering the evaporator, adjusting the refrigerant supply according to system ...

MRCOOL MC25-1412 Mini Split Flared Line Set is a 25-foot refrigerant line set designed for compatible 12K and 18K BTU ductless mini-split HVAC systems. Featuring 1/4-inch and 1/2-inch copper lines with flared connections, it links the indoor air ...

The MRCOOL NV15-3834 No-Vac Pre-Charged Line Set is a 15-foot refrigerant connection set featuring 3/8-inch and 3/4-inch copper lines, designed to simplify HVAC installation. Pre-charged with refrigerant and equipped with No-Vac technology, it co...

The Resideo VR8305M2102/B Combination Redundant Gas Valve is a gas control component designed to regulate fuel flow in compatible gas-fired HVAC equipment. It uses integrated redundant safety valves to control the supply of natural gas to the bur...

MRCOOL DIY25-3858C-O DIY 5th Gen 24K–36K BTU Line Set with Pro Cable is a 25-foot pre-charged line set designed for compatible ductless mini-split HVAC systems. It features 3/8-inch and 5/8-inch copper refrigerant lines that connect the indoo...

The MRCOOL MHK15U Universal Air Handler Heat Strip is a 15 kW electric heating accessory with an integrated circuit breaker, designed to provide supplemental heat for compatible air-handler systems. When activated, the electric resistance element...

The MRCOOL MLP1SS Signature Series Single-Stage Gas Furnace Propane Conversion Kit is designed to convert compatible MRCOOL Signature Series single-stage gas furnaces for propane operation. The kit modifies the furnace’s fuel delivery compo...

The Trane KIT19854 BLDC Motor Upgrade Kit is a brushless DC motor retrofit solution designed to improve the performance and efficiency of compatible HVAC blower systems. It operates by using electronic commutation to control motor rotation and de...

The MRCOOL MCAEHFD5X1AA Signature Series Multi-Position Air Handlers Heat Kit is an electric heating accessory designed for compatible MRCOOL Signature Series multi-position air handlers. It converts electrical energy into supplemental heat and w...

Rheem-Ruud SP20999B Combustion Blower Assembly is a replacement component designed for compatible Rheem-Ruud furnaces and heating equipment. It supplies the controlled airflow required for proper combustion by moving air into the burner system a...

The Trane MOT12857 ECM Programmed Motor is a 1/2 HP electronically commutated motor designed for HVAC blower and air-handling applications. Operating at 115/230V, it uses integrated electronic controls to regulate motor speed and maintain consist...

The MRCOOL DIY16-1412-O DIY Pre-Charged Line Set is designed for compatible 9,000, 12,000, and 18,000 BTU MRCOOL DIY ductless mini-split air conditioning and heat pump systems. It connects the indoor air handler to the outdoor condenser, providi...

The Nidec-Embraco NEK6213GK2 is a 1/2 HP hermetic reciprocating compressor designed for commercial refrigeration systems using R404A refrigerant and 208–230V single-phase power. It works by compressing low-pressure refrigerant vapor and cir...