Carrier 11002015000396 Fan Motor
Location: (Chicago)
The Carrier 11002015000396 Fan Motor is a replacement DC motor rated at 850 RPM, 310VDC, and 20W, designed for compatible Carrier HVAC equipment. It converts electrical energy into rotational motion to drive a fan, supporting consistent airflow through the system. This motor is used in compatible air conditioners, heat pumps, and other HVAC units requiring reliable fan operation. Its efficient design helps maintain proper air circulation, heat transfer, and temperature control. Replacing a worn motor can restore airflow, reduce operating issues, and support dependable HVAC performance.
For an efficient and reliable HVAC system, the Carrier Fan Motor is a great choice for optimal system performance.
#Carrier #Carrierparts #11002015000396 #FanMotor #PartsHnC #HVACParts #FurnaceParts #AirConditionerParts
Visit The Web site:
https://www.partshnc.com/carrier-11002015000396-fan-motor-850-rpm-310vdc-20w
Website
Email
8667730907 
The Friedrich Air Conditioning 69700640 Cross Flow Fan is a replacement indoor blower component designed for compatible Friedrich ductless air-conditioning systems. It works with the indoor fan motor to draw air across the evaporator coil and di...
The Trane BRD5311 Board is an electronic control component designed to manage and coordinate electrical functions within compatible Trane HVAC equipment. It receives signals from connected sensors and controls system components according to opera...
The Friedrich Air Conditioning 67000179 Control Board Kit is a genuine OEM electronic control board designed as a replacement for compatible Friedrich Kühl room air conditioners. It receives and processes inputs such as temperature settings,...
_121996_Thermistor_Duct_thumb.jpg)
The Automation Components Inc. (ACI) 121996 Thermistor Duct is a temperature-sensing component with an 8-inch probe and protective enclosure, designed for HVAC duct applications. It uses a thermistor to detect changes in air temperature and provi...
The Utica-Dunkirk BD722143801V BD Temperature Sensor TODS is a temperature-sensing component designed to monitor operating conditions in compatible heating equipment. It detects temperature changes and provides feedback to the control system, hel...
The NTI Boiler 64980459 Air Vent is a 1/2-inch MIP NPT air-venting component designed to remove trapped air from hydronic heating systems. It works by automatically releasing accumulated air from the boiler or piping while helping maintain proper...
The Sporlan Controls 164371 Thermostatic Expansion Valve is a precision refrigerant metering component designed for compatible HVAC and refrigeration systems. It regulates refrigerant flow into the evaporator based on superheat conditions, helpi...
The Trane BAYSENS251A CO2 Wall Mount Sensor is an indoor air-quality sensor designed to monitor carbon dioxide levels in occupied spaces. It measures CO2 concentration and provides a signal to compatible HVAC controls, allowing ventilation equipm...
The Danfoss 015G3098 Thermostatic Sensor, Mounted RAS-D, is a temperature-sensing component designed to regulate heating system performance by responding to changes in room temperature. It works with a thermostatic radiator valve, sensing ambient...
The Gree 10352039 Wheel is a replacement blower wheel designed for compatible Gree HVAC equipment. It rotates with the blower motor to move conditioned air through the indoor unit and connected ductwork, supporting proper airflow and heat transfe...
Customers can shop armored USB cables from Plugsters for applications that require stronger cable protection and dependable device connections. Our team helps review connector types, cable length, equipment compatibility, routing conditions, and usag...
The Amana-Goodman 0154A00000BL Drain Pan Gasket is a replacement sealing component designed to create a secure, leak-resistant connection around an HVAC drain pan. It works by forming a tight seal between mating surfaces, helping prevent condensa...
The Daikin-McQuay 4007625 Control Panel Assembly is a replacement control component designed for compatible Daikin-McQuay HVAC equipment. It houses and coordinates electrical controls that manage system functions, allowing connected components to...
The AERCO Boiler and Water Heater 60011-4 Blower Proof Switch Assembly is a safety control designed to verify proper blower operation in compatible AERCO boilers and water heaters. It monitors air pressure created by the blower and signals the co...
The Nidec-Embraco 513556529-ESP Start Capacitor is an electrical component designed to provide the additional starting power required by compatible compressor motors. It temporarily stores and releases electrical energy during startup, helping th...
The Amana-Goodman 0130R00116 Round Start Capacitor is an 88-106 MFD, 330V electrical component designed to provide an extra boost of power during compressor or motor startup. It temporarily stores and releases electrical energy, helping HVAC moto...
The First Company CP81-59 0.059-inch Orifice Piston is a refrigerant metering component designed for compatible HVAC systems. It regulates the flow of liquid refrigerant into the evaporator by creating a controlled pressure drop, helping maintai...
The Rheem-Ruud SP21236B Display Control Adapter Kit G4-5 is a replacement control accessory designed to connect the display interface with internal control components in compatible Rheem-Ruud G4 and G5 series HVAC/water-heating equipment. It work...
The Rheem-Ruud RTG20212BC Heat Exchanger Thermistor is a temperature-sensing component designed for compatible Rheem and Ruud tankless water heaters. It monitors heat exchanger temperature and changes its electrical resistance according to temper...
The Resideo L4064B2228/B Fan & Limit Controller is a temperature-sensing control designed to manage blower operation and provide high-temperature protection in compatible heating systems. It monitors furnace temperature and activates the blow...