Danfoss 084B4078 Display Cable 3M AK-UI55
Location: (chicago)
The Danfoss 084B4078 AK-UI55 Display Cable is a 3-meter OEM connection cable designed to link compatible AK-UI55 displays with Danfoss refrigeration controllers. It uses an RJ12 connection to transmit power and communication signals between the controller and remote display, enabling clear monitoring and control of system operating conditions. The cable is used with Danfoss AK-CC55 refrigeration controllers and AK-UI55 Bluetooth, Set, and Info displays. Its 3-meter length provides flexible installation options, while reliable signal transmission supports accurate display operation, convenient system monitoring, easier servicing, and dependable refrigeration control.
For an efficient and reliable HVAC system, the Danfoss Display Cable is a great choice for optimal system performance.
#Danfoss #DanfossParts #084B4078 #DisplayCable #HVACParts #HnCParts #FurnaceParts #AirConditionerParts
Visit The Website: https://www.partshnc.com/danfoss-084b4078-ak-ui55-3m-display-cable
Website
Email
8667730907 
The First Company 9-360-58P Horizontal Drain Pan Assembly is a replacement condensate drain pan designed for horizontal HVAC air handlers and fan coil units. It collects moisture produced during the cooling and dehumidification process and direct...
The Nidec-Embraco 2324069-ESP Overload is a protective electrical component designed to safeguard compatible refrigeration and HVAC compressor systems. It monitors compressor current and temperature, interrupting the electrical circuit when exce...
The Daikin-McQuay 2544650 IR Receiver Board is an OEM electronic component designed to receive and interpret infrared signals from remote controls in compatible Daikin HVAC systems. It detects user commands and communicates them to the unit&rsquo...
The Honeywell Thermal Solutions RM7800L1053 Programming Burner Control is an electronic combustion management component designed for compatible commercial and industrial heating systems. It controls the burner sequence by coordinating ignition, f...
The International Comfort Products 1193684 ECM Blower Motor is an electronically commutated motor designed to drive blower assemblies in compatible HVAC equipment. It uses integrated electronic controls to adjust motor speed according to system d...
_thumb.jpg)
The Lennox 13Y48 Air Handler Evaporator Coil is a replacement heat-transfer component designed for compatible Lennox air handler systems. It works by allowing refrigerant to absorb heat from indoor air as air passes across the coil, helping produ...
The Honeywell Thermal Solutions RM7890B1030 On-Off Primary Burner Control is a 120V electronic control designed to manage burner operation in compatible commercial and industrial heating equipment. It sequences ignition, monitors flame status, a...
The Rheem-Ruud 43-25134-07 Single Oval Run Capacitor is a 20 MFD, 370 VAC electrical component designed for compatible Rheem and Ruud HVAC systems. It stores and releases electrical energy continuously to help motors start and operate efficiently...
The Nordyne 1041573 Evaporator Coil is a replacement heat-exchange component designed for compatible Nordyne HVAC systems. Installed in the indoor air handler or furnace section, it works by circulating refrigerant through the coil while absorbi...
The Danfoss 119-8254E Fan Motor is a replacement motor designed to power fan assemblies in compatible HVAC and refrigeration equipment. It converts electrical energy into rotational motion, driving the fan to circulate air across coils or through...
The Rheem Water Heater SP11309L Anode Rod is a corrosion-protection component designed for compatible Rheem water heaters. Installed inside the storage tank, it attracts corrosive elements in the water, allowing the anode rod to deteriorate instead...
The Lochinvar & A.O. Smith 100284322 Venturi Natural Gas Assembly is a replacement component designed to regulate and mix natural gas with combustion air in compatible boilers and water heaters. Its Venturi design helps create the proper gas-...
The Watts 0856810 3/4" NPT Flow Balance Valve is a lead-free hydronic balancing valve designed to measure and regulate water flow in HVAC systems. Its integrated flow-measuring ports allow technicians to check flow rates and adjust the valve...
The Johnson Controls A421GEF-02C Electronic Temperature Control is a versatile temperature controller designed for HVAC and refrigeration applications, supporting 100V and 24 VAC power with a U1 input type. It monitors temperature through a compa...
The Heat Controller 11002015A00096 Brushless DC Motor is a replacement motor designed to drive the blower or fan assembly in compatible HVAC equipment. Its brushless DC design uses electronic commutation to provide smooth, efficient motor operati...
The AERCO Boiler and Water Heater 84017 Condensate Trap O-Ring is a replacement sealing component designed for condensate traps used in AERCO Benchmark boilers and Innovation and ReCon water heaters. Installed beneath the trap cover, the O-ring c...
The Amana-Goodman CAP015000500RP Capacitor is an electrical component designed for compatible Amana and Goodman HVAC equipment. It stores and releases electrical energy to provide the starting and running support required by motors and compressor...
The First Company CP81-51 0.051" Orifice Piston is a refrigerant metering component designed to regulate refrigerant flow through compatible HVAC systems. Its precisely sized orifice restricts and meters liquid refrigerant entering the evapo...
The Field Controls UV-18 18" Duct Air Purifier is an in-duct air purification system designed for residential forced-air HVAC systems, including central heating and air conditioning equipment. It uses a high-intensity UVC lamp to treat circu...
The First Company CP7324 3/8" x 3/8" Thermal Expansion Valve is a refrigeration control component designed to regulate refrigerant flow into an evaporator. It responds to evaporator outlet temperature and pressure, adjusting the valve o...