Trane MOT20246 1HP Motor Copper Outer Diameter
Location: (chicago)
The Trane FAN03849 2-Blade Fan is a 28-inch diameter aluminum fan with a 30-degree pitch, 1/2-inch bore, and counterclockwise rotation, designed for compatible HVAC applications. It operates by rotating to move air across heat exchange surfaces, supporting efficient heat transfer and proper system operation. This fan is used in compatible Trane air conditioning systems, condensers, and other HVAC equipment requiring the specified fan configuration. Its durable aluminum construction offers corrosion resistance, lightweight performance, and reliable operation. Replacing a damaged fan helps restore airflow, maintain cooling efficiency, reduce overheating risks, and support dependable HVAC system performance.
For an efficient and reliable HVAC system, the Trane Motor Copper is a great choice for optimal system performance.
#Trane #TraneParts #MOT20246 #MotorCopper #HVACParts #HnCParts #FurnaceParts #AirConditionerParts
Visit The Website: https://www.partshnc.com/trane-mot20246-1hp-motor-copper-outer-diameter-460v-3-ph
Website
Email
8667730907 
The Trane COM06434 14-ton compressor is a replacement component designed for compatible Trane HVAC systems, including models CSHA-140K-000 and CSHA-140-00A. It compresses low-pressure refrigerant vapor and circulates it through the refrigeration ...
The Trane FAN04074 3-Blade Aluminum Fan is a replacement fan component designed to support proper airflow in compatible Trane HVAC equipment. Its three-blade design rotates to move air across the condenser coil, helping dissipate heat and maintai...
The Trane ARM00191 Motor Mount Arm is a structural support component designed to secure and position compatible motors within HVAC equipment. It helps maintain proper motor alignment and stability during operation, supporting effective power tra...
The Trane FAN04754 1-Cross Flow Fan is an HVAC component designed to facilitate consistent air circulation within compatible heating and cooling equipment. It operates by drawing air through its cross-flow mechanism and distributing it evenly acr...
The Trane COM09376 1-Ton Compressor is a refrigeration component designed to circulate refrigerant throughout compatible HVAC systems. It compresses low-pressure refrigerant vapor into high-pressure vapor, enabling the refrigerant cycle to transf...
The Trane CNT05176 3-Phase Line Monitor Control is an electrical protection device designed to monitor voltage conditions in compatible three-phase HVAC equipment operating within its 180–632VAC range. It detects electrical irregularities, ...
The Trane MOD02105 IPAK Multi-Purpose Module is an electronic control component designed to support the operation and coordination of compatible Trane HVAC equipment. It processes control signals and helps manage system functions, enabling connec...
The Trane CTR02575 3-Pole Contactor is an electrical switching device rated at 30A and 50/60Hz, featuring a 24V coil for controlling compatible HVAC equipment. When the coil receives a control signal, it activates the contacts to connect or disco...
The Trane MOT16751 1/2HP ECM Motor is an electronically commutated motor designed to deliver efficient and reliable airflow in compatible HVAC systems. It uses electronic controls to regulate motor operation, helping maintain consistent air circu...
The Trane FAN04755 2-Cross Flow Fan is an HVAC component designed to promote uniform air circulation across compatible heating and cooling equipment. Its cross-flow design draws air through the fan and distributes it evenly along the outlet, su...
The Trane FAN01531 is a three-blade fan designed for compatible Trane HVAC equipment, featuring a 26-inch diameter and a 22°–25° blade pitch. It rotates to move air across heat transfer surfaces, helping dissipate heat and maintain ...
The Trane USA2035 Oval Capacitor is an electrical component designed to support the operation of compatible HVAC motors by storing and releasing electrical energy as needed. It helps provide the necessary electrical phase shift for reliable motor...
The Trane BLW01401 2-Stage Blower Inducer is an HVAC component designed to support proper airflow and combustion venting in compatible gas furnaces. Operating at 115V and 60Hz, with two speeds of 3300 and 2345 RPM, it helps establish the necessar...
The Trane EXC01877 Heat Exchanger is a replacement component designed for compatible Trane HVAC heating equipment. It transfers heat generated during the heating process to the circulating air while keeping combustion gases separate from the indo...
_thumb.jpg)
The Trane WIR11494 2-Speed VFD Pigtail Wire Harness is an electrical connection component designed to link compatible variable frequency drives (VFDs) with HVAC system components. It facilitates reliable signal and power connections, supporting t...
The Trane COM08476 1.13-Ton Compressor 230V AS14D-YZ5-A_A is an essential HVAC component designed to circulate and compress refrigerant within compatible air conditioning and heat pump systems. Operating on a 230V power supply, it increases refri...
The Trane EXC01857 Heat Exchanger is a replacement component designed for compatible Trane HVAC heating systems. It transfers heat generated during the heating process to the circulating air while keeping combustion gases separate from the indoor...
The Trane WEL00848 Static Well Bulb Tap, measuring 1.0 inch in length, is an HVAC component designed to provide a mounting point for a temperature-sensing bulb within compatible heating and cooling systems. It helps position the sensing bulb for ef...
The Trane EXC01855 Heat Exchanger is a replacement component designed for compatible Trane HVAC heating equipment. It transfers heat from the heating process to the circulating air or another designated medium without allowing the two streams to ...
The Trane VAL11520 3 Ton Expansion Valve is a precision HVAC component designed to regulate refrigerant flow into the evaporator coil for efficient cooling performance. Featuring a 0.375-inch ODF inlet, this expansion valve controls refrigerant d...