Trane FAN04755 2-Cross Flow Fan
Location: (chicago)
The Trane FAN04755 2-Cross Flow Fan is an HVAC component designed to promote uniform air circulation across compatible heating and cooling equipment. Its cross-flow design draws air through the fan and distributes it evenly along the outlet, supporting consistent airflow throughout the system. This fan is used in compatible Trane HVAC units where efficient air movement is essential for maintaining indoor comfort. Key benefits include balanced airflow distribution, quiet operation when properly installed, improved air circulation, and reliable performance. It is suitable for replacement and maintenance applications to help restore proper equipment functionality and support effective climate control.
For an efficient and reliable HVAC system, the Trane 2-Cross Flow Fan is a great choice for optimal system performance.
#Trane #TraneParts #FAN04755 #FlowFan #HVACParts #HnCParts #FurnaceParts #AirConditionerParts
Visit The Website: https://www.partshnc.com/trane-fan04755-2-cross-flow-fan
Website
Email
8667730907 
The Trane CTR02575 3-Pole Contactor is an electrical switching device rated at 30A and 50/60Hz, featuring a 24V coil for controlling compatible HVAC equipment. When the coil receives a control signal, it activates the contacts to connect or disco...
The Trane MOT16751 1/2HP ECM Motor is an electronically commutated motor designed to deliver efficient and reliable airflow in compatible HVAC systems. It uses electronic controls to regulate motor operation, helping maintain consistent air circu...
The Trane FAN01531 is a three-blade fan designed for compatible Trane HVAC equipment, featuring a 26-inch diameter and a 22°–25° blade pitch. It rotates to move air across heat transfer surfaces, helping dissipate heat and maintain ...
The Trane USA2035 Oval Capacitor is an electrical component designed to support the operation of compatible HVAC motors by storing and releasing electrical energy as needed. It helps provide the necessary electrical phase shift for reliable motor...
The Trane BLW01401 2-Stage Blower Inducer is an HVAC component designed to support proper airflow and combustion venting in compatible gas furnaces. Operating at 115V and 60Hz, with two speeds of 3300 and 2345 RPM, it helps establish the necessar...
The Trane EXC01877 Heat Exchanger is a replacement component designed for compatible Trane HVAC heating equipment. It transfers heat generated during the heating process to the circulating air while keeping combustion gases separate from the indo...
_thumb.jpg)
The Trane WIR11494 2-Speed VFD Pigtail Wire Harness is an electrical connection component designed to link compatible variable frequency drives (VFDs) with HVAC system components. It facilitates reliable signal and power connections, supporting t...
The Trane COM08476 1.13-Ton Compressor 230V AS14D-YZ5-A_A is an essential HVAC component designed to circulate and compress refrigerant within compatible air conditioning and heat pump systems. Operating on a 230V power supply, it increases refri...
The Trane EXC01857 Heat Exchanger is a replacement component designed for compatible Trane HVAC heating systems. It transfers heat generated during the heating process to the circulating air while keeping combustion gases separate from the indoor...
The Trane WEL00848 Static Well Bulb Tap, measuring 1.0 inch in length, is an HVAC component designed to provide a mounting point for a temperature-sensing bulb within compatible heating and cooling systems. It helps position the sensing bulb for ef...
The Trane EXC01855 Heat Exchanger is a replacement component designed for compatible Trane HVAC heating equipment. It transfers heat from the heating process to the circulating air or another designated medium without allowing the two streams to ...
The Trane VAL11520 3 Ton Expansion Valve is a precision HVAC component designed to regulate refrigerant flow into the evaporator coil for efficient cooling performance. Featuring a 0.375-inch ODF inlet, this expansion valve controls refrigerant d...
The Raypak H000329 Temperature Sensor is a replacement sensing component designed to monitor water temperature in compatible Raypak heating equipment. It detects temperature changes and sends electrical signals to the control system, enabling acc...
The Trane WIR06512 3-Pin Wire Harness Junction is an electrical wiring component featuring 16 AWG black, red, and green wires for connecting compatible HVAC system components. It provides an organized connection point that helps transmit electric...
The Trane FAN03849 2-Blade Fan is a 28-inch diameter aluminum fan with a 30-degree pitch, 1/2-inch bore, and counterclockwise rotation, designed for compatible HVAC applications. It operates by rotating to move air across heat exchange surfaces, ...
The Mitsubishi VFD FR-D740-036-NA 2HP Variable Frequency Drive is an electronic motor controller designed to regulate the speed and torque of compatible three-phase AC motors. It adjusts the motor’s frequency and voltage to match operating ...
The Carrier EA36UZ134 Thermostatic Expansion Valve is a refrigerant metering component designed for compatible Carrier air conditioning and heat pump systems. It regulates the flow of refrigerant into the evaporator according to cooling demand a...
The Trane CNT07939 Integrated Furnace Control is an electronic control board designed to manage key heating functions in compatible Trane furnaces. It coordinates the ignition sequence, monitors safety switches, and controls components such as th...
The YORK S1-6111672 3HP Programmed Variable Frequency Drive Controller is an HVAC control component designed for compatible 240V, three-phase motor applications. It regulates motor speed by adjusting the frequency and voltage of the electrical po...
The IBC Technologies P-1511 Ignitor Kit is a replacement ignition component designed for compatible IBC gas-fired boilers. It generates the heat or spark required to initiate burner ignition, working with the boiler’s control system to su...