Kitchen Appliances Advertising Ads – Free Classified Ads

The Comark ATT50 Immersion Probe K-Type is a durable temperature probe designed to be used with compatible K-type thermometers, delivering a wide measurement range from -40° to 1550°F. It works by inserting the probe tip directly into the su...

The Hatco R02.04.500.00 Booster Element is a high-capacity heating component designed for use in commercial booster water heaters, featuring a 1-3/4" on-center configuration with a 2-1/2" flange for secure installation. It works by conver...

The Groen 119823 Fuse 6A provides essential electrical protection by safeguarding circuits in commercial kitchen equipment from overcurrent conditions. Designed to handle up to 6 amps, this fuse works by interrupting the electrical flow whe...

The Whirlpool EDR5RXD1 Refrigerator Water Filter 5 provides filtered water by reducing common contaminants in compatible refrigerator systems. This replacement filter is installed inside the refrigerator compartment, typically in the grille or uppe...

The Allpoints 521054 Twin Adjustable Gas Filter provides effective filtration to help maintain clean and consistent gas flow in equipment systems. Designed with a 1/8" MPT connection and a 50-micron filtration level, it works by trapping fine pa...

The Henny Penny 65466 Fry Basket is designed to support efficient and consistent frying in commercial kitchen environments. It holds food securely while allowing hot oil to circulate evenly, helping achieve uniform cooking results. Built with durable...

The Hatco 02.04.500.00 Booster Element is a high-performance heating component designed for booster water heaters, featuring a 2-1/2" square flange with 1-3/4" on-center bolt holes for secure installation. Operating at high wattage, it co...

The Blodgett 4589 Oven Gas Pressure Regulator controls and maintains consistent level supplied to  burners used in commercial systems. Designed with a 3/4-inch connection, it regulates incoming natural gas pressure within a range of 3 to 6 inche...

The Whirlpool EDR3RXD1 Refrigerator Water Filter 3 provides filtered water by reducing common contaminants in compatible refrigerator systems. This filter is used within the internal water filtration housing to support clean water flow for drinking...

The Allpoints 521028 3/4" NAT Pressure Regulator ensures stable and reliable gas pressure control for compatible equipment. Designed to regulate natural gas flow within a 3"–6" WC range, it works by automatically adjusting inter...

The Imperial 28299 Fryer Conversion Kit provides a practical solution for adapting commercial fryers to a different fuel type, ensuring continued performance and compatibility. This kit includes the necessary components to safely convert the fryer&r...

The Groen Z009752 Stripe Tube Glass is used to provide a clear visual indication of liquid levels in commercial kitchen equipment. Featuring a red and white striped design, this glass tube is installed within a gauge assembly to help operat...

The Hatco 02-12-003 motor/blower assembly delivers steady airflow to help maintain safe operating temperatures in commercial equipment. This component features a 115V, 60Hz motor integrated with a 4-blade cooling fan, designed to circulate air withi...

The Duke 600541 Oven 3 Heat Switch Rotary Switch W/ 6 Term, D Stem & .150" Flat Down is designed to regulate heating settings in compatible commercial ovens. This rotary switch features three selectable heat positions and six terminals, al...

The Allpoints 261420 50 FT Aluminum Tubing, 5/16" OD provides a flexible and reliable pathway for transporting air, liquids, or compatible gases in various applications. This aluminum tubing functions by allowing controlled flow through its ...

The Hatco 02.08.120D.00 Warmer Element 208V 2050W provides consistent heat output to maintain proper food holding temperatures in commercial warming equipment. This heating element is designed as a replacement component that generates heat when ele...

The Pitco AFR21-0017-01 Fryer Pucks are designed to help support routine fryer maintenance and cleaning in commercial kitchen equipment. Supplied in a pack of five, these pucks are used during the fryer cleaning process to help break dow...

The AllPoints 511257 Thermopile 60' 2 Lead W/Pg9 Adapt provides reliable thermal sensing to help control and maintain safe operation in gas-powered commercial equipment. Designed as a thermopile generator, it works by converting heat from the...

The LG EBR85624963 Refrigerator PCB Main Control Board is an electronic control component used to regulate and coordinate key refrigerator functions. This PCB assembly operates as the central circuit board that receives signals from sensors and se...

The Allpoints 511280 Pilot Assembly is a replacement part used in gas-powered appliances to generate and maintain a steady pilot flame, which ignites the main burner when needed. It works by delivering a controlled flow of gas through the pilot orifi...

The Pitco P8903-41 Natural Gas Pressure Regulator controls and stabilizes power supplied to burners used in commercial systems. Designed for natural gas applications, the regulator maintains a standard outlet pressure of 3.5 inches water column and ...

The Globe MCR75 Slicing Machine Relay 8A 250V is a reliable electrical component designed to control and protect the operation of compatible slicing machines. This relay acts as an automatic switch that manages electrical flow within the machine, a...

The Allpoints 511130 72" Coaxial Thermocouple with 11/32"-32 threads provides reliable flame sensing for gas-powered commercial cooking equipment. Designed as a temperature-sensing safety component, it works by generating a small electrical...

The Pitco P6072344 Fryer Wire/Glass Screen Donut is designed to help control splatter and improve safety during frying operations in commercial kitchen equipment. Measuring 24" x 34" and equipped with handles, this screen is place...

The Garland 1955501 Oven Control Board helps maintain accurate oven temperatures between 150°F and 500°F for consistent cooking results in commercial kitchen equipment. It is an electronic control component designed to regulate and manage the...

The Pitco P8901-64 Thermopile W/PG9 Adaptor generates electrical energy from heat to operate the gas control system in pilot assemblies used in commercial systems. This component produces up to 750 millivolts when heated by the pilot flame, converti...

The Dormont A50R Snap-Fast Quick Disconnect 1/2" In/Out is designed to make connecting and disconnecting equipment fast and secure. This quick-disconnect coupling is used with gas connectors to attach movable appliances such as grills or range...

The LG **EBR85194702** Washer Display PCB Assembly regulates user interface functions and cycle communication in compatible washing machines. This electronic control board is used within the control panel to manage signals between the main control sy...

The Garland 2301200 oven rack provides stable, reliable support for cookware inside compatible commercial ovens, helping ensure even cooking and efficient oven use. Designed with a durable 3/8" diameter frame and a single support bar, this rack ...

The Pitco 60203002 Fryer BMVR LP Gas Valve helps control the flow of propane gas to fryer burners, supporting safe and steady operation in commercial kitchen equipment. Designed for systems operating at 10.0 inches water column (W.C.), th...

The Dormont R48P42-0512-10 Pressure Regulator 3/4" LP is designed to regulate liquefied propane gas flow to appliances, maintaining a stable outlet pressure for burners and pilot systems. It features 3/4" female NPT connections and operat...

The Polar Hardware 5031FL-R Latch W/Fl-1/8" Strike & IR provides a secure and reliable way to keep walk-in doors and enclosures properly closed during daily operation. This mechanical latch is designed to mount on compatible doors and works ...

The LG EBR85130512 Dryer PCB Assembly is an electronic control board used to regulate and coordinate key functions within compatible LG dryers. This printed circuit board acts as the central control component, processing signals from sensors and u...

The Dormont T4-KIT-24 Flex Tube Kit provides a reliable and flexible connection for gas and pilot line applications. Featuring a 1/4" diameter and 24" length stainless steel tube, this kit is designed to help create a secure link between ...

The Pitco 60124501 Fryer Thermostat RX 3/8" x 5" Cap 36" regulates oil temperature by controlling the heating cycle in commercial systems. This mechanical thermostat features a 3/8-inch by 5-inch sensing bulb connected to a 3...

The Garland 1311000 oven rack is a durable replacement rack designed to provide stable support for cookware inside compatible commercial ovens. Built with a 3/8" diameter frame and a single center support, it helps distribute weight evenly while...

The Allpoints 481028 Cut Out Kit 60T35 provides a practical solution for creating accurate cutouts needed during equipment installation or component replacement. Designed to support precise fitting, this kit works by guiding the cutting process to he...

The LG EBR85130504 Dryer Main PCB Assembly regulates and manages the electrical operations of compatible LG dryers. This electronic control board functions as the central circuit component that coordinates signals between the user interface, sensor...

Pitco PT60125401 Thermostat RX, 3/8 X 5, Cap 36 The Pitco PT60125401 Fryer Thermostat helps regulate and maintain consistent oil temperature in commercial kitchen equipment. Designed with a 3/8" x 5" sensing bulb and a 36"...

The Dormont R48N42-0306-3.5 Pressure Regulator helps maintain stable gas pressure for safe and consistent operation of commercial gas appliances. Designed for natural gas systems, this regulator features 3/4" FPT connections and supports a...

The Pitco PT60059302 Fryer Drain Line Gasket 2.875" x 2" is designed to seal the connection point to prevent oil leakage in commercial systems. This sleeve-style gasket fits around the drain line opening and compresses between connected com...

The Pitco A1907902C Fryer Joining Strip helps securely connect adjacent fryers, creating a stable and aligned setup for commercial kitchen equipment. Made from stainless steel and measuring 24-5/16" x 1-1/4", this joining strip ...

The Allpoints 266185 32" Stainless Steel Plate Leg with Feet provides sturdy and reliable support for compatible commercial equipment or work surfaces. Designed as a set of four legs, each unit attaches to the base of a table or equipment platfo...

The Frymaster FM8263668 Fryer Ignition Module Kit ensures reliable and efficient ignition for commercial fryers, providing consistent performance and reducing downtime in busy kitchen environments. Designed to control the spark and gas flow, this mod...

The LG EBR84696701 Washer Main PCB Assembly is an electronic control board used to regulate key operations in compatible washing machines. This component functions as the central control unit that processes signals from sensors and user inputs, the...

The Dormont R48N32-0306-3.5 Gas Pressure Regulator helps maintain stable gas pressure to ensure safe and consistent operation of commercial gas appliances. Designed with 1/2" FPT connections for natural gas systems, this regulator delivers an ...

The Allpoints 265597 Fryer Splash Guard helps reduce hot oil splatter around commercial fryers, supporting a cleaner and safer cooking area. Made from stainless steel, this guard is designed to mount alongside the fryer to act as a protective barrier...

The Pitco PTB8046101 Fryer Gas Burner 11" is designed to generate the flame required to heat oil inside used in commercial systems. Constructed from heat-resistant metal with a burner screen structure, it distributes gas evenly and ignites to pr...

The Pitco B7490701 Fryer Crumb Scoop is designed to remove food particles and sediment from the bottom of tanks in commercial systems. Constructed from stainless steel, the scoop is shaped to reach between fryer tubes and into the cold zone where cru...

The Electro Freeze HC199032-01 Duckbill Inlet Valve with Remountable Mounts ensures reliable fluid control for soft-serve and frozen dessert machines, providing consistent performance and minimizing leaks. Designed to regulate the flow of mix into th...