Xylem-Bell & Gossett 118036 Strainer & Gasket Kit

The International Comfort Products 1190383 Flame Sensor is a critical safety component that detects the presence of flame within HVAC combustion systems. It monitors the flame’s electrical signal and informs the control board to maintain or...

The Nidec-Secop 117U4129 Starting Relay with Klixon 115V is an electromechanical control device designed to ensure reliable startup of compressor motors in HVAC and refrigeration systems. It works by momentarily energizing the compressor’s ...

The International Comfort Products 1172533 Hot Surface Ignitor is an electric ignition device engineered for dependable startup of gas-fired HVAC heating systems. It operates by electrically heating a ceramic surface until it reaches ignition tem...

The International Comfort Products 1172506 is a DPST flange-mount relay designed to control high-voltage electrical loads in HVAC systems. It operates by using a low-voltage control signal to open or close two separate power circuits simultaneou...

The Quincy Compressor 112845-06 Air Filter Element is a high-efficiency filtration component designed to remove dust, debris, and airborne contaminants from compressed air systems. It works by trapping harmful particles before they enter the com...

The International Comfort Products 1172227 Transition Assembly is a ducting component designed to connect and adapt airflow paths between HVAC system sections. It provides a smooth transition between different duct or cabinet sizes, allowing air ...

The International Comfort Products 1171734 Circuit Board with Time Delay Relay is a control module that manages HVAC system operations by regulating timing sequences and electrical functions. It works by delaying relay activation to protect compo...

The Emerson Climate-White Rodgers 1127-2-100/240F SPDT Strap-On Temperature Control is a surface-mount aquastat designed to monitor and regulate hot-water pipe temperature in hydronic HVAC systems. It straps directly onto a pipe and uses a sensing ...

The International Comfort Products 1086486 Condenser Motor is an electric motor designed to drive condenser fans in HVAC cooling systems. It converts electrical energy into mechanical rotation to move air across the condenser coil, allowing effic...

The Reznor 110861 Natural Gas Horizontal Spark Pilot Kit is a reliable ignition component designed for Reznor gas-fired HVAC heating equipment. It provides safe and consistent burner ignition by generating an electronic spark to light the pilot f...

The Velocity Boiler Works (Crown) 107863-01 Programmable Boiler Control Module is an advanced control unit that manages boiler operation for optimal performance. It monitors temperature and system feedback to schedule firing cycles, regulate heat...

The Daikin-McQuay 107179807 2-Position Normally Closed Actuator is an electric control device designed to operate HVAC valves by moving them between open and closed positions based on control signals. When de-energized, it defaults to the closed ...

The Burnham Boiler 106495-02 Temperature Sensor Kit is a precision component designed to monitor water temperature within hydronic boiler systems. It measures real-time temperature and relays accurate data to the boiler control, ensuring optimal ...

The Resideo VU52S2010 2-Way Fan Coil Valve is a precision hydronic control valve designed to regulate water flow in fan coil HVAC units. It modulates flow based on actuator input, enabling accurate temperature control and efficient heat transfer ...

The Resideo VU444A1007 Valve Actuator is an electric control device designed to operate HVAC zone valves with precision, converting control signals into smooth valve movement to regulate fluid flow. It is commonly used in hydronic heating and coo...

The Resideo VU443A1008 Valve Actuator is a 120 V electric actuator designed to drive HVAC valves for precise flow control in hydronic systems. It converts electrical signals into mechanical motion to open or close valves based on system demand, o...

The Resideo VU843A1020 is a 24V, two-position spring-return actuator designed for normally closed VU53 valve bodies to control hot or chilled water flow in HVAC hydronic systems. It operates by electrically driving the valve open during a control...

The Schneider Electric (Erie) VT2323 is a 2-way zone valve body with a 3/4-inch NPT connection and 3.5 Cv flow capacity, designed for controlling hot or chilled water in HVAC hydronic systems. Constructed with a durable brass body, it works with a ...

The Schneider Electric (Erie) VT2327 is a 2-way zone valve with a 3/4 inch NPT connection and a 7.0 Cv rating, designed to control water flow in hydronic HVAC systems. The valve operates by opening or closing in response to control signals, regul...

The Chevron Pneumatic Tubing 1063769 is a 1/4-inch flexible air line designed for efficient air signal distribution in HVAC pneumatic control systems. It transmits compressed air between controllers, actuators, and valves to ensure accurate contr...