X10 SIP Paging Gateway – Industrial IP Audio Solution
Location: (Pennsylvania (PA))
Bueno Electric offers the X10 SIP Paging Gateway, a compact and high-performance IP audio device designed for industrial communication applications. It converts SIP voice streams from IP-PBX or SIP paging systems into analog audio for reliable communication.
The X10 supports applications such as public address systems, background music, intercom communication, and industrial paging. With open-standard SIP protocol support, flexible functionality, and a compact design, it can be customized for different paging and intercom requirements.
Designed for smart and safety-focused environments, the X10 SIP Paging Gateway helps improve communication efficiency, information sharing, and reliable audio distribution across industrial facilities.
Key Features:
-
SIP-enabled IP audio gateway
Converts SIP voice streams to analog audio
Supports IP-PBX and SIP paging systems
Suitable for paging, intercom, PA systems, and background music
Compact and flexible hardware design
Open-standard SIP protocol support
Designed for industrial and smart environments
Email
The Fenwal 35-605957-015 Ignition Module is an electronic control component designed to manage ignition and flame-starting functions in compatible gas-fired HVAC equipment. It coordinates the ignition sequence, controls the ignition source, and w...
The Honeywell T6069A4002 Fan Coil Thermostat is a temperature control designed to regulate comfort in fan coil HVAC systems. It monitors room temperature and signals the connected equipment to provide heating or cooling as needed, helping maintai...
The Trane KIT12480 Flow Switch Kit U40100 is a monitoring and safety component designed to detect fluid flow in hydronic HVAC systems. It operates by sensing water movement through the system and sending a signal when adequate flow is present or ...
The Trane TCONT824AS52DC XL824 Thermostat is a Wi-Fi-enabled comfort control designed to manage temperature and comfort settings in compatible HVAC systems. It communicates with heating and cooling equipment to maintain the selected indoor condit...
The ClimateMaster 34B0108N02 Compressor is a replacement refrigeration component designed for compatible ClimateMaster geothermal heat pump systems. It circulates and compresses refrigerant through the sealed refrigeration circuit, raising refrig...
The Tecumseh VS323ET-109-J7 4HP Compressor is a commercial refrigeration compressor designed to circulate and compress refrigerant within a cooling system. Operating on 208–230V power, it draws low-pressure refrigerant vapor from the evapor...
The Carrier SYSTXBBECC01-C Evolution Connex Control is an advanced thermostat and system control designed for compatible Carrier Evolution HVAC equipment. It communicates with connected heating and cooling components to monitor conditions and ma...
The Trane VAL19424 Thermal Expansion Valve (TXV) HXCE-1-ZX200 is a precision refrigerant metering component designed to regulate refrigerant flow into an evaporator. It works by responding to evaporator outlet temperature and pressure, automatica...
The Fisher 289H-42 Pressure Relief Valve is a protective valve designed to help regulate and safely release excess pressure in compatible gas and HVAC system applications. It operates by opening when system pressure reaches a predetermined level,...
The Taco Z075T3-2 3-Way Zone Sentry Valve is a 3/4-inch NPT, 24V motorized valve designed to regulate fluid flow in hydronic HVAC systems. It operates by using an electric actuator to position the three-way valve, directing heated or chilled wate...
The Trane VAL10600 Thermal Expansion Valve Assembly is a refrigerant metering component designed for compatible Trane HVAC systems. It regulates refrigerant flow into the evaporator based on temperature and pressure conditions, helping maintain ...
The Lennox 27A07 DSI Ignition Control Board is a replacement electronic control designed for compatible Lennox gas-fired HVAC equipment. It manages the direct spark ignition sequence by controlling the ignition system and coordinating burner oper...
The Carrier ZS2-CAR Communicating Sensor I-VU is a wall-mounted communicating sensor designed to monitor and control indoor environmental conditions in HVAC applications. It measures temperature and can provide occupancy-related information to th...
The Duff Norton LT225-1-150 Linear Actuator is a 12 VDC electromechanical actuator designed to provide controlled linear movement with a 225 lb load capacity and 5.9-inch stroke. It converts electrical power into precise push-and-pull motion for ...
The Nu-Calgon 4778-26 Coil Gun Connector/Turbo Tank is a replacement accessory designed for compatible HVAC coil cleaning equipment. It connects the coil cleaning gun to the Turbo Tank, allowing cleaning solution to be delivered through the syste...
The Xylem-Goulds Pumps 10K169 Seal Kit is an OEM mechanical sealing component designed for Goulds vertical multistage pumps, including the 10SV, 15SV, and 22SV series used in HVAC hydronic circulation applications. It works by creating a tight ba...
The Rheem-Ruud 42-105601-33 Pressure Switch is a safety control designed to monitor pressure conditions within HVAC equipment and help ensure proper system operation. It responds to changes in air or vent pressure and signals the control system w...
The IBC Technologies 251-063B EZ Pipe Manifold is a replacement plumbing component designed for compatible IBC boiler systems. It provides a structured connection point for integrating piping with the boiler, helping direct and distribute water t...
The Danfoss 084B4078 AK-UI55 Display Cable is a 3-meter OEM connection cable designed to link compatible AK-UI55 displays with Danfoss refrigeration controllers. It uses an RJ12 connection to transmit power and communication signals between the c...
The First Company 9-360-58P Horizontal Drain Pan Assembly is a replacement condensate drain pan designed for horizontal HVAC air handlers and fan coil units. It collects moisture produced during the cooling and dehumidification process and direct...
