Utica-Dunkirk Ga-004.00-Gauge Glass Assembly
The Utica-Dunkirk GA-004.00 gauge glass assembly is a reliable water level monitoring component designed for boiler systems. It provides a clear visual indication of water level by allowing operators to observe fluid height within the glass tube, ensuring safe operation. Commonly used in steam and hot water boilers, it supports accurate level monitoring and system control. Its durable construction, clear visibility, and dependable performance help prevent low-water conditions, reduce maintenance risks, enhance safety, and ensure efficient, consistent HVAC system operation.
For an efficient and reliable HVAC system, the Utica-Dunkirk-Gauge Glass Assembly is a great choice for optimal system performance.
#Utica-Dunkirk #Utica-DunkirkParts #Ga-004.00 #GaugeGlass #PartsHnC #HVACParts #FurnaceParts #AirConditionerParts
Visit The Website: https://www.partshnc.com/ga-00400-utica-dunkirk-gauge-glass-assembly
Website
Email
8667730907 
The Crown Engineering H24-30 Spiralink coupler CCW 1/2" x 1/2" is a precision mechanical coupling designed for secure shaft connections in HVAC and burner drive systems. It operates by linking rotating components with a counterclockwise c...
_thumb.jpg)
The Veris Industries H-708 Adjustable Current Switch with LED is a reliable sensing device designed to monitor electrical current in HVAC systems. It detects current flow within a 1–135A range and automatically activates when the set thresh...
The Aaon G024540 high pressure switch 475/650 PSI is a safety control device designed to protect HVAC systems from excessive refrigerant pressure. It operates by monitoring system pressure and automatically opening the electrical circuit when pre...
_thumb.jpg)
The Littelfuse FLNR150 Time Delay Fuse is an overcurrent protection device designed to safeguard HVAC electrical systems. It features a time-delay mechanism that allows temporary inrush currents from motors and compressors while opening the circu...
_thumb.jpg)
The Emerson Climate White-Rodgers F84-0433 3/4" Zone Valve Assembly is a reliable control component designed for hydronic HVAC systems. It regulates the flow of hot or chilled water in zoned heating and cooling applications, commonly used wi...
_thumb.jpg)
The Resideo F300E1001 Electronic Air Cleaner is a high-efficiency air filtration system designed to improve indoor air quality in HVAC systems. With a 1200 CFM capacity and 16" x 20" size, it integrates with forced-air heating and cooling...
_thumb.jpg)
The Littelfuse FLNR080 Time Delay Fuse (80 Amp, 250V) is an electrical protection device designed to safeguard HVAC equipment from overcurrent conditions. It operates with a time-delay feature that allows temporary inrush currents, such as motor ...
The Auburn E5-FRS-4-4 4-inch flame rod with 1/4-inch mounting is a compact flame sensing component designed for industrial and commercial HVAC burner systems. It operates by detecting electrical conductivity through the flame to confirm proper ig...
_thumb.jpg)
The Carrier EF33CW189 2-stage natural gas valve is a precision component designed for use in residential and light commercial HVAC furnaces. It regulates gas flow in two stages, allowing the system to adjust heat output efficiently based on dema...
The Auburn E5-FRS-2-6 6-inch flame rod with 1/2-inch NPT mounting is a reliable flame sensing component used in industrial and commercial HVAC burner systems. It detects the presence of a flame by conducting a small electrical current through the...
_thumb.jpg)
The Cleveland Controls DFS-221-199 Pressure Switch is an airflow proving device designed to monitor air pressure in HVAC systems. It operates using a diaphragm that responds to positive, negative, or differential air pressure, activating a snap-a...
The KMC Controls CSC-2004 Reset Volume Controller is a reliable HVAC control device designed to regulate airflow in variable air volume (VAV) systems. It operates by adjusting damper position in response to temperature changes, maintaining consi...
The Superior Radiant CE002 Ignitor Probe PSE-SP6 is a specialized ignition component designed for gas-fired infrared heating systems. It functions by generating a spark or heat source to ignite gas within the burner, ensuring reliable startup and c...
The Honeywell CCT735A is a precision thermostat calibration tool designed to adjust and fine-tune pneumatic thermostat settings in HVAC systems. It works by using an integrated screwdriver and Allen wrench mechanism to accurately modify setpoint...
The Trane COV5618 Top Cover Assembly is a protective enclosure component designed for HVAC condenser and air handling units. It functions as the top housing, covering critical internal parts such as the fan and electrical components while allowi...
_thumb.jpg)
The Honeywell C7046D1008 8-Inch Duct Sensing Probe is a precision temperature sensing device designed for HVAC systems to monitor air conditions within ductwork. It operates using a thermistor element that detects temperature changes and transmit...
_thumb.jpg)
The Trane COV05617 Top Appearance Cover is a protective enclosure component designed for outdoor HVAC condenser and heat pump units. It functions as the top housing, covering internal components such as the fan assembly and electrical parts while...
The Honeywell C7035A1031 Minipeeper UV Flame Sensor is a compact ultraviolet sensing device designed to detect the presence of flame in industrial and commercial combustion systems. It operates by monitoring UV radiation emitted during fuel combu...
The Cutler Hammer-Eaton C25DND330T 3-Pole Contactor is an electromechanical switching device designed to control power flow in HVAC systems. Operating with a 24V coil, it responds to thermostat signals by opening or closing electrical contacts to...
_thumb.jpg)
The Field Controls CAS-34U Universal Combustion Air System is a mechanical air supply unit designed to provide controlled combustion air for fuel-burning HVAC equipment. It operates by delivering outside air into confined spaces in response to bur...