Tecumseh TC-1156-E Compressor
Location: (Chicago)
The Tecumseh TC-1156-E Compressor is a 120V refrigeration compressor designed for systems using R-134a refrigerant. It compresses low-pressure refrigerant vapor and circulates it through the refrigeration cycle, enabling effective heat removal and cooling. This compressor is commonly used in refrigeration equipment such as reach-in coolers, display cases, beverage coolers, and other light commercial refrigeration applications. Its reliable operation supports consistent cooling performance and helps maintain proper system temperatures. The compact design and dependable compression make it a practical replacement for compatible refrigeration systems requiring efficient, stable performance.
For an efficient and reliable HVAC system, the Tecumseh Compressor is a great choice for optimal system performance.
#Tecumseh #Tecumsehparts #TC-1156-E #Compressor #PartsHnC #HVACParts #FurnaceParts #AirConditionerParts
Visit The Web site:
https://www.partshnc.com/tc-1156-e-tecumseh-compressor-r-134-120v
Website
Email
8667730907 _thumb.jpg)
The Trane VAL19629 3-Ton Thermal Expansion Valve (TXV) is a precision refrigerant metering device designed for compatible HVAC and refrigeration systems. With 3/8-inch inlet and 1/2-inch outlet connections, it regulates the amount of refrigerant ...
The Fenwal 35-605957-015 Ignition Module is an electronic control component designed to manage ignition and flame-starting functions in compatible gas-fired HVAC equipment. It coordinates the ignition sequence, controls the ignition source, and w...
The Honeywell T6069A4002 Fan Coil Thermostat is a temperature control designed to regulate comfort in fan coil HVAC systems. It monitors room temperature and signals the connected equipment to provide heating or cooling as needed, helping maintai...
The Trane KIT12480 Flow Switch Kit U40100 is a monitoring and safety component designed to detect fluid flow in hydronic HVAC systems. It operates by sensing water movement through the system and sending a signal when adequate flow is present or ...
The Trane TCONT824AS52DC XL824 Thermostat is a Wi-Fi-enabled comfort control designed to manage temperature and comfort settings in compatible HVAC systems. It communicates with heating and cooling equipment to maintain the selected indoor condit...
The ClimateMaster 34B0108N02 Compressor is a replacement refrigeration component designed for compatible ClimateMaster geothermal heat pump systems. It circulates and compresses refrigerant through the sealed refrigeration circuit, raising refrig...
The Tecumseh VS323ET-109-J7 4HP Compressor is a commercial refrigeration compressor designed to circulate and compress refrigerant within a cooling system. Operating on 208–230V power, it draws low-pressure refrigerant vapor from the evapor...
The Carrier SYSTXBBECC01-C Evolution Connex Control is an advanced thermostat and system control designed for compatible Carrier Evolution HVAC equipment. It communicates with connected heating and cooling components to monitor conditions and ma...
__thumb.jpg)
The Trane VAL19424 Thermal Expansion Valve (TXV) HXCE-1-ZX200 is a precision refrigerant metering component designed to regulate refrigerant flow into an evaporator. It works by responding to evaporator outlet temperature and pressure, automatica...
The Fisher 289H-42 Pressure Relief Valve is a protective valve designed to help regulate and safely release excess pressure in compatible gas and HVAC system applications. It operates by opening when system pressure reaches a predetermined level,...
The Taco Z075T3-2 3-Way Zone Sentry Valve is a 3/4-inch NPT, 24V motorized valve designed to regulate fluid flow in hydronic HVAC systems. It operates by using an electric actuator to position the three-way valve, directing heated or chilled wate...
The Trane VAL10600 Thermal Expansion Valve Assembly is a refrigerant metering component designed for compatible Trane HVAC systems. It regulates refrigerant flow into the evaporator based on temperature and pressure conditions, helping maintain ...
The Lennox 27A07 DSI Ignition Control Board is a replacement electronic control designed for compatible Lennox gas-fired HVAC equipment. It manages the direct spark ignition sequence by controlling the ignition system and coordinating burner oper...
The Carrier ZS2-CAR Communicating Sensor I-VU is a wall-mounted communicating sensor designed to monitor and control indoor environmental conditions in HVAC applications. It measures temperature and can provide occupancy-related information to th...
The Duff Norton LT225-1-150 Linear Actuator is a 12 VDC electromechanical actuator designed to provide controlled linear movement with a 225 lb load capacity and 5.9-inch stroke. It converts electrical power into precise push-and-pull motion for ...
The Nu-Calgon 4778-26 Coil Gun Connector/Turbo Tank is a replacement accessory designed for compatible HVAC coil cleaning equipment. It connects the coil cleaning gun to the Turbo Tank, allowing cleaning solution to be delivered through the syste...
The Xylem-Goulds Pumps 10K169 Seal Kit is an OEM mechanical sealing component designed for Goulds vertical multistage pumps, including the 10SV, 15SV, and 22SV series used in HVAC hydronic circulation applications. It works by creating a tight ba...
The Rheem-Ruud 42-105601-33 Pressure Switch is a safety control designed to monitor pressure conditions within HVAC equipment and help ensure proper system operation. It responds to changes in air or vent pressure and signals the control system w...
The IBC Technologies 251-063B EZ Pipe Manifold is a replacement plumbing component designed for compatible IBC boiler systems. It provides a structured connection point for integrating piping with the boiler, helping direct and distribute water t...
The Danfoss 084B4078 AK-UI55 Display Cable is a 3-meter OEM connection cable designed to link compatible AK-UI55 displays with Danfoss refrigeration controllers. It uses an RJ12 connection to transmit power and communication signals between the c...