Tecumseh Ae1432E-209-J7-115V Recip Compressor

The Schneider Electric (Erie) AG13B020 2-Position Valve Actuator is a reliable electromechanical actuator designed to control the opening and closing of zone valves in HVAC systems. It operates using a two-position, spring-return mechanism that drive...

The Trane ACT0317 Normally Open Actuator is a 24-volt control device designed to regulate dampers or valves in HVAC systems. It converts electrical signals into mechanical movement, opening or positioning airflow components as required by the co...

The Schneider Electric (Erie) AG13A020 2-Position Valve Actuator is a reliable electromechanical device designed to control the opening and closing of zone valves in HVAC systems. It operates using a two-position, spring-return mechanism that actua...

The Trane ACT0316 Normally Closed Actuator 24V is a control device designed to regulate the position of valves or dampers in HVAC systems. It operates by receiving a 24-volt signal to open, allowing air or gas flow, and automatically returns to t...

The Schneider Electric (Barber Colman) AM-116 Crank Arm with 1/2" Splined Shaft is a mechanical linkage component designed for use with HVAC damper actuators and control systems. It connects the actuator to the damper shaft, converting the act...

The Johnson Controls AFS-460-DSS Air Flow Switch is a robust airflow sensing device designed to monitor and control air pressure in HVAC systems. It operates by detecting differential pressure changes and activating a switch when airflow reaches th...

The Fireye AC6A1BD Actuator 75' Upright 120 VAC is a rotary actuator designed to control dampers and valves in burner management and HVAC combustion systems. Powered by a 120-volt AC supply, it delivers a precise 75-degree rotary motion t...

The Schneider Electric (Erie) AG14T060 N/C On/Off Actuator is an electric valve actuator designed to control fluid flow in HVAC hydronic and heating systems. Operating on 277V with 96-inch leads, this normally closed actuator automatically opens ...

The Johnson Controls A421ABD-02 SPDT Electronic Temperature Control is a digital temperature control device designed to regulate heating or cooling systems in commercial and industrial HVAC applications. It monitors temperature through a connecte...

The Schneider Electric (Erie) AG14A02A High Temperature Actuator is an on/off electric actuator designed to control valves in HVAC heating and hydronic systems. Operating on 24 VAC, it automatically opens or closes a compatible valve in response to...

The Cleveland Controls AFS-222-121 SPDT Air Pressure Switch is a reliable airflow sensing device designed to monitor differential air pressure in HVAC systems. It functions by comparing pressure between two ports and triggering an SPDT switch when ...

The Johnson Controls A350PS-1 SPDT Proportional Plus Integral Temperature Control is an electronic temperature controller designed to maintain stable temperature regulation in HVAC systems. Using proportional plus integral (PI) control logic, it ...

The Armstrong International A21958-1 Gasket is a precision sealing component designed for use in Armstrong F&T steam traps, including B4, B5, A3, A4, and A5 models commonly found in HVAC steam systems. This gasket forms a secure seal between ...

The Cleveland Controls AFS-222-112 Differential Air Pressure Switch is a precision sensing device designed to monitor differential air pressure in HVAC systems. It operates by detecting pressure changes between two ports and activating an electrica...

The Suntec A1YD7154B 1‑Stage Oil Pump 1725 RPM is a fuel delivery pump designed for oil-fired heating equipment. It operates using a single-stage gear mechanism that draws fuel oil from the tank and pressurizes it to supply the burner nozzle fo...

The Johnson Controls A19QSC-1 SPDT Temperature Control is a mechanical temperature controller designed to regulate equipment within a 0°F to 150°F range with a fixed 5°F differential. It operates by sensing temperature changes and act...

The Lennox 98M39 1-Phase Variable Speed Condenser Fan Motor is a 1/3 HP motor designed for Lennox outdoor air conditioning and heat pump condenser units operating on 208–230V power. It drives the condenser fan to move air across the condenser c...

The Johnson Controls A-4000-1037 In-Line Pneumatic Filter Barb is a compact filtration component designed to protect pneumatic HVAC control systems from dust, oil, and debris. Installed directly in pneumatic tubing, the in-line barb filter allow...

The Johnson Controls A19BAC-1 SPDT Single-Stage Mechanical Thermostat is a temperature control device designed to regulate HVAC and refrigeration systems within a range of 30°F to 110°F. It uses a coiled sensing bulb that responds to tem...

The Dwyer Instruments A-302F-A 4″ Stainless Steel Hook-Style Static Pressure Tip is a precision accessory designed to measure static air pressure in HVAC duct systems. Constructed from durable stainless steel, the hook-style tip inserts thr...