Siemens S55180-A157 N/C Zone Valve Actuator Non-Spring Return 24VAC 0-10VDC
Location: (Chicago)
The Siemens S55180-A157 N/C Zone Valve Actuator (Non-Spring Return, 24 VAC, 0-10 VDC) is an electronic actuator that modulates zone valves in HVAC hydronic systems. It operates by converting a 0-10 V control signal into precise valve positioning, regulating hot or chilled water flow to maintain set temperatures. Used in air handlers, radiant systems, and fan coil units, it improves zoned climate control, enhances comfort, increases energy efficiency, and supports smoother system responsiveness with reliable, accurate valve actuation.
For an efficient and reliable HVAC system, the Siemens Zone Valve Actuator Non-Spring Return is a great choice for optimal system performance.
#Siemens #SiemensParts #S55180-A157 #Actuator #HVACParts #FurnaceParts #AirConditionerParts
Visit The Website:
https://www.partshnc.com/s55180-a157-siemens-building-technology-24vac-0-10-vdc-actuator-nsr-nc
Website
Email
8667730907 _thumb.jpg)
The Honeywell 535-34AB08-203 Strap-On Pipe Sensor 20K Ohm is a temperature sensing device designed for hydronic heating and cooling systems. Mounted directly onto piping, it monitors fluid temperature using a 20K Ohm thermistor to provide accurat...
The Rheem-Ruud 47-100436-84J Blower Control Board Kit is designed to control and regulate the blower motor in HVAC systems. It ensures smooth operation by managing airflow and fan speed, optimizing system performance and energy efficiency. Compat...
_thumb.jpg)
The Heatcraft Refrigeration 5054F 18" Molded Fan Guard is a durable gray plastic protective guard designed for refrigeration and HVAC condenser and evaporator fan assemblies. Manufactured by Heatcraft Refrigeration Products, it shields fan ...
_thumb.jpg){kind=spacer}
The Honeywell 50017460-001 Internal Transformer is a 24 VAC power supply designed for HVAC control systems operating on 120 or 240-volt input. Manufactured by Honeywell, it converts line voltage to low-voltage power required for thermostats, zone...
_thumb.jpg)
The Rheem-Ruud 47-100436-02 Control Board is an essential component for HVAC systems, designed to regulate and control various functions of heating and cooling units. It acts as the central hub for electrical signals, ensuring efficient operatio...
The Siemens 466857488 Replacement PCB Repair Kit for SKB/B/D62U is a service component designed to restore proper function to HVAC control circuit boards. It includes key parts to replace worn or damaged printed circuit board elements, ensuring a...
The Rheem Manufacturing Company–Ruud 47-20045-02 Auto Limit Switch (110°F–150°F) is a temperature-sensitive safety control designed to protect HVAC equipment from overheating. It automatically opens the circuit when temperatur...
_thumb.jpg)
Markel Products Co. 42297-001 Duct Heater Limit 210°F Markel Products Co. 42297-001 Duct Heater Limit 210°F is a high-temperature safety limit control designed to protect electric duct heaters from overheating. Installed withi...
The Reznor 45602 High Limit Switch Auto Reset L180-60F is a temperature safety control designed to protect heating equipment from overheating. Operating within a 120°–180°F range, it monitors internal temperatures and automatically ...
The Littelfuse 455 3PH Line-Load Voltage Monitor is a protective control device designed to safeguard three-phase HVAC equipment from voltage irregularities. It continuously monitors line and load voltages, detecting phase loss, imbalance, under-...
_thumb.jpg)
The Rheem-Ruud 45-104090-01 Wiring Harness Assembly is a genuine replacement component designed for use in select furnaces and air handlers manufactured by Rheem Manufacturing Company and Ruud systems. This wiring harness connects and organizes e...
_thumb.jpg)
The Slant/Fin 440-539-000 Burner is a high-quality combustion component designed for gas-fired HVAC equipment. It delivers a consistent air-fuel mixture to support efficient ignition and stable flame in furnaces and boilers. Engineered for compat...
_thumb.jpg)
The Nidec-US Motors 44 Motor with a 10″ bolt circle and 3-leg flex mount is a robust electric motor designed to drive fans and blowers in HVAC systems. It converts electrical energy into rotational motion to circulate air through ducts, coi...
_thumb.jpg)
The Nu-Calgon 4296-24 15-Ton Pan Pads are durable vibration-absorbing pads designed to support and isolate rooftop HVAC units. Placed under the unit’s condensate pan or base, they minimize vibration transfer to the building structure, reduc...
_thumb.jpg)
The Rheem 42-101233-81 SPST Pressure Switch 0.35" PF is a single-pole, single-throw (SPST) pressure switch designed for reliable operation in gas-fired HVAC systems. Rated at 0.35" pressure, it monitors air pressure within the furnace&r...
_thumb.jpg)
The Daikin-McQuay 4009582 Fan Blower Wheel is a precision-engineered airflow component that moves air through HVAC systems by spinning within the blower assembly. It draws return air across coils and pushes conditioned air into occupied spaces, ...
_thumb.jpg)
The Xylem-Hoffman Specialty 401485 3/4" Water Vent 150 PSI Max 78 is an automatic float-operated air vent designed for hydronic heating and cooling systems. Rated for up to 150 PSI, it removes trapped air from water lines to maintain efficie...
The Siemens Industrial Controls 3TX7112-1LF13 DPDT Relay is an 8-pin electromechanical relay rated at 16A with a 120V coil, designed for precise circuit switching in HVAC control systems. It works by energizing an internal coil that moves double-...
_thumb.jpg)
The Resideo 40003916-046 Replacement Head for 24 V V8044A is a precise control module that regulates valve position in HVAC hydronic systems. It responds to 24 V control signals to modulate water flow through zone and mixing valves, optimizing he...
_thumb.jpg)
The Xylem-Hoffman Specialty 401475 Water & Steam Vent Valve (1/8" NPT, 50 PSI) is a precision air vent designed for steam and hydronic HVAC systems. It automatically releases trapped air from radiators, convectors, unit heaters, and stea...