Schneider Electric VS2222 High Temperature Valve 2.5Cv

The Resideo VR8215S1214T is a single-stage, direct ignition gas valve designed for 24V HVAC heating systems. It controls the flow of natural gas to the burner by opening and closing rapidly in response to thermostat signals, supporting fast-fast ...

The Honeywell VP525C1065 is a 3/4-inch, two-way pneumatic radiator angle valve designed for precise control of hot water or steam flow in HVAC heating systems. It operates using pneumatic air pressure to modulate valve position against a spring r...

The Schneider Electric (Erie) VM3212 is a 1/2-inch sweat-connected, 3-way modulating control valve designed to regulate hot or chilled water flow in HVAC hydronic systems. Built with a brass body and PopTop design, it works with proportional or t...

The Schneider Electric (Erie) VM2222 is a 2-way, 2 Cv modulating control valve with a 1/2-inch NPT connection, designed to regulate water or glycol flow in HVAC hydronic systems. It works with a compatible actuator to modulate valve position base...

The Schneider Electric (Barber Colman) VK-7211-201-4-4 is a normally open 1/2-inch globe valve designed for precise flow control in HVAC hydronic systems. Operating within a 3–7 PSI range, it modulates fluid flow through linear valve moveme...

The Schneider Electric (Erie) VM2213 is a 2-way modulating control valve with a 1/2" sweat connection, designed to regulate water or glycol flow in HVAC hydronic systems. Built with a brass body and a 4.0 Cv flow coefficient, it works by adj...

The Greenheck (Venco) VCDR-53-8-KIT is an 8-inch round airflow control damper with an actuator mounting bracket, designed to regulate air volume in low- to medium-pressure HVAC duct systems. It operates by opening or closing internal blades&mdash...

The Resideo VCZZ7100 3-Way Linear Valve Cartridge is a precision-engineered replacement component designed to regulate water flow in hydronic HVAC systems. It operates by modulating flow between three ports, enabling accurate control of heating o...

If your operation relies on consistent water heating and cannot afford heater failure, material breakdown, or uneven temperature control, a full immersion electric water heater built for industrial environments makes a real difference. Process Techno...

Resideo V8043A1227 is a 24V normally closed zone valve with a 1/2" NPT connection and 3.5 Cv, designed to regulate hydronic flow in HVAC zoning systems. The valve operates by opening to allow water flow when powered and closing to stop flow ...

The Regal Rexnord Fasco UB562 1-Speed Refrigeration Motor is a compact, energy-efficient electric motor designed to deliver reliable airflow in refrigeration and HVAC applications. Operating at 1550 RPM with a 9-watt, 115-volt power rating, it co...

Unlock the best GPS tracker deals at GPSCoTech with corporate discounts, bulk pricing, and flexible billing options. Monitor vehicles, fleets, and assets in real time while cutting fuel costs and improving productivity. Access smart reporting, driver...

Prevent workplace accidents with SharpEagle's advanced overhead crane lights, engineered for maximum visibility in demanding industrial environments. Our overhead crane warning lights project focused beams directly onto floors, clearly ou...

The Titus HVAC TMS-3-8-24X24 Ceiling Diffuser is a supply air diffuser designed for integration with commercial HVAC systems. It fits standard 24″ × 24″ ceiling grids and connects to ductwork via an 8″ neck, distributing c...

Resideo TG510A1001 is a small clear plastic thermostat guard designed to protect wall-mounted thermostats from tampering, damage, and unauthorized adjustments. The guard works by enclosing the thermostat in a durable, transparent cover that allow...

The Johnson Controls TE-68NT-1N00S Temperature Sensor Setpoint Override (1 K Nickel) is a control accessory that allows manual override of temperature setpoints while providing accurate sensor feedback. It works by measuring ambient or system tem...

The Resideo TH1110DH1003 Non-Programmable Digital Thermostat (PRO1000) is a digital temperature control device for HVAC systems, including furnaces, air conditioners, and heat pumps. It monitors indoor temperature and signals the heating or cooling...

The Johnson Controls TE-6311M-1 8″ Duct Temperature Sensor (1 K OHM) is a precision HVAC sensing device that measures air temperature within ductwork and converts it to a conditioned electrical signal for control systems. It works by detect...

The Resideo TD-090 Tridicator is a versatile HVAC/R temperature and pressure sensor designed for use in refrigeration and air conditioning systems. Featuring a 1/4″ NPT connection, it measures pressure up to 75 PSI and temperatures from 60°...

The Honeywell TB6980A1007 Single Output Module Floating Thermostat is a control device that provides simple on/off (floating) output for HVAC systems. It operates by sensing ambient temperature and signaling equipment to engage heating or cooling...