Peco Controls SP155-027 Compatible Zone Sensor

The PennBarry 63821-0 1-Speed Motor 1/4 HP 115V 1500 RPM is a reliable electric motor designed to power HVAC ventilation and air movement equipment. Operating on a 115-volt power supply, it delivers a consistent 1500 RPM with a single-speed confi...

Looking for a GPS tracker in Michigan to monitor your vehicle or fleet? GPSCOTECH offers advanced tracking solutions with live location updates, instant alerts, and trip history for better visibility. Easy to install and simple to use for personal ve...

The Nordyne 664435R In-Line Drain is a condensate drainage component designed for high-efficiency HVAC heating systems. Installed in the condensate line of gas furnaces or air handlers, it directs and removes moisture produced during the heating ...

The PennBarry 63750-0 1/3 HP 115V 1550 RPM 3-Speed Motor is a durable electric motor designed to power HVAC ventilation and air movement systems. It operates using a 115-volt supply and delivers up to 1550 RPM with three selectable speeds, allowi...

The Nordyne 661128R Inshot Burner is a gas combustion component designed for residential and light-commercial HVAC heating systems. It mixes natural gas with air and directs the mixture into the burner tube, where ignition produces a stable flame f...

The Nordyne 632624 SPST Pressure Switch is a safety control component used in HVAC furnace systems to monitor and regulate air pressure within the venting system. It operates by sensing negative pressure created by the inducer motor; when proper ...

The Packard 66056‑115V 1/15Hp Inducer Motor is a combustion draft inducer motor designed for gas-fired HVAC heating systems such as furnaces and boilers. It operates by driving a blower wheel that pulls combustion gases through the heat exchang...

The Nordyne 632546R Dual Pressure Switch Control is a safety device designed to monitor both high and low pressure conditions within HVAC heating systems. It detects the airflow and draft pressure created by the inducer motor and confirms that pr...

The Nordyne 632487R Pressure Switch (-0.90" Water Column, SPST) is a safety control device designed to monitor airflow and draft pressure in HVAC heating systems. It senses the negative pressure created by the inducer motor and closes its el...

The Nordyne 632445R SPST Pressure Switch (1.10" Water Column) is a safety control device designed to monitor airflow and draft pressure in gas-fired HVAC systems. It senses the negative pressure created by the inducer motor and closes its el...

The Midco International 641800M-J3 Electrode Assembly is an ignition and flame-sensing component designed for use in commercial and industrial gas burner systems. It generates the spark required to ignite the burner and helps monitor flame prese...

The Nordyne 632444R SPST Pressure Switch is a safety control device designed to monitor airflow and pressure within HVAC heating systems. It detects the negative pressure created by the inducer motor and closes its electrical contacts when the pr...

The Nordyne 626428R CO Limit Switch is a safety component designed for use in HVAC furnace systems to monitor carbon monoxide and temperature conditions. It works by detecting unsafe levels or overheating within the furnace and automatically inte...

The Xylem‑McDonnell & Miller 63‑M Low Water Cut Off 143100 is a safety control designed to protect boiler systems from low water conditions. Featuring a 1-inch connection and rated for up to 50 PSI, this mechanical low water cut off monit...

The Friedrich Air Conditioning 62601008 Control Board (Electric Heat) is a vital component designed for use in HVAC systems. It regulates the operation of electric heating elements, ensuring optimal performance and energy efficiency. This control...

The Rheem-Ruud 62-42506-02 Integrated Furnace Control Board is an electronic control module that manages and coordinates key functions of gas furnaces in HVAC systems. Acting as the system’s central controller, it regulates ignition sequenc...

The Rheem-Ruud 62-24044-71 Non-Integrated Remote Flame Sensor Retrofit Kit is a safety component designed to upgrade flame detection in gas-fired HVAC systems. It monitors the presence of burner flame and sends a signal to the control board to co...

The Rheem-Ruud 62-23556-82 Direct Spark Ignitor with cable is a combustion component that generates a reliable electrical spark to ignite fuel in HVAC heating systems. It delivers precise spark energy directly at the burner, ensuring consistent i...

The Nordyne 626449R Auto Limit Switch is a safety control component designed for HVAC heating systems. It features a 3-1/8-inch probe and operates within a temperature range of 225°F to 250°F to protect equipment from overheating. Install...

The Modine 5H0735930000 Auto Limit Switch is a safety control device that monitors temperature limits in HVAC equipment and interrupts operation when preset thresholds are reached. It helps prevent overheating by opening its contacts to shut dow...