MRCOOL UHK15 Heat Kit with Circuit Breaker
Location: (Chicago)
The MRCOOL UHK15 Universal Series Air Handlers Heat Kit with Circuit Breaker is an electric heating accessory designed to provide supplemental heat for compatible air handlers. When activated by the HVAC system’s controls, the heating elements convert electrical energy into heat, while the air handler’s blower distributes warmed air through the ductwork. Designed for use with compatible MRCOOL Universal Series air handlers and heat pump systems, this heat kit provides dependable auxiliary heating, consistent indoor comfort, reliable temperature control, and added protection through its integrated circuit breaker.
For an efficient and reliable HVAC system, the MRCOOL UHK15 Universal 15kW Electric Heat Kit is a great choice for optimal system performance.
#MRCOOL #MRCOOLParts #UHK15 #HeatKit #HVACParts #PartsHnC #FurnaceParts #AirConditionerParts
Visit The Website:
https://www.partshnc.com/mrcool-universal-series-15kw-electric-heat-kit-uhk15
Website
Email
8667730907 
The Carrier SYSTXBBECC01-C Evolution Connex Control is an advanced thermostat and system control designed for compatible Carrier Evolution HVAC equipment. It communicates with connected heating and cooling components to monitor conditions and ma...
__thumb.jpg)
The Trane VAL19424 Thermal Expansion Valve (TXV) HXCE-1-ZX200 is a precision refrigerant metering component designed to regulate refrigerant flow into an evaporator. It works by responding to evaporator outlet temperature and pressure, automatica...
The Fisher 289H-42 Pressure Relief Valve is a protective valve designed to help regulate and safely release excess pressure in compatible gas and HVAC system applications. It operates by opening when system pressure reaches a predetermined level,...
The Taco Z075T3-2 3-Way Zone Sentry Valve is a 3/4-inch NPT, 24V motorized valve designed to regulate fluid flow in hydronic HVAC systems. It operates by using an electric actuator to position the three-way valve, directing heated or chilled wate...
The Trane VAL10600 Thermal Expansion Valve Assembly is a refrigerant metering component designed for compatible Trane HVAC systems. It regulates refrigerant flow into the evaporator based on temperature and pressure conditions, helping maintain ...
The Lennox 27A07 DSI Ignition Control Board is a replacement electronic control designed for compatible Lennox gas-fired HVAC equipment. It manages the direct spark ignition sequence by controlling the ignition system and coordinating burner oper...
The Carrier ZS2-CAR Communicating Sensor I-VU is a wall-mounted communicating sensor designed to monitor and control indoor environmental conditions in HVAC applications. It measures temperature and can provide occupancy-related information to th...
The Duff Norton LT225-1-150 Linear Actuator is a 12 VDC electromechanical actuator designed to provide controlled linear movement with a 225 lb load capacity and 5.9-inch stroke. It converts electrical power into precise push-and-pull motion for ...
The Nu-Calgon 4778-26 Coil Gun Connector/Turbo Tank is a replacement accessory designed for compatible HVAC coil cleaning equipment. It connects the coil cleaning gun to the Turbo Tank, allowing cleaning solution to be delivered through the syste...
The Xylem-Goulds Pumps 10K169 Seal Kit is an OEM mechanical sealing component designed for Goulds vertical multistage pumps, including the 10SV, 15SV, and 22SV series used in HVAC hydronic circulation applications. It works by creating a tight ba...
The Rheem-Ruud 42-105601-33 Pressure Switch is a safety control designed to monitor pressure conditions within HVAC equipment and help ensure proper system operation. It responds to changes in air or vent pressure and signals the control system w...
The IBC Technologies 251-063B EZ Pipe Manifold is a replacement plumbing component designed for compatible IBC boiler systems. It provides a structured connection point for integrating piping with the boiler, helping direct and distribute water t...
The Danfoss 084B4078 AK-UI55 Display Cable is a 3-meter OEM connection cable designed to link compatible AK-UI55 displays with Danfoss refrigeration controllers. It uses an RJ12 connection to transmit power and communication signals between the c...
The First Company 9-360-58P Horizontal Drain Pan Assembly is a replacement condensate drain pan designed for horizontal HVAC air handlers and fan coil units. It collects moisture produced during the cooling and dehumidification process and direct...
The Nidec-Embraco 2324069-ESP Overload is a protective electrical component designed to safeguard compatible refrigeration and HVAC compressor systems. It monitors compressor current and temperature, interrupting the electrical circuit when exce...
The Daikin-McQuay 2544650 IR Receiver Board is an OEM electronic component designed to receive and interpret infrared signals from remote controls in compatible Daikin HVAC systems. It detects user commands and communicates them to the unit&rsquo...
The Honeywell Thermal Solutions RM7800L1053 Programming Burner Control is an electronic combustion management component designed for compatible commercial and industrial heating systems. It controls the burner sequence by coordinating ignition, f...
The International Comfort Products 1193684 ECM Blower Motor is an electronically commutated motor designed to drive blower assemblies in compatible HVAC equipment. It uses integrated electronic controls to adjust motor speed according to system d...
_thumb.jpg)
The Lennox 13Y48 Air Handler Evaporator Coil is a replacement heat-transfer component designed for compatible Lennox air handler systems. It works by allowing refrigerant to absorb heat from indoor air as air passes across the coil, helping produ...
The Honeywell Thermal Solutions RM7890B1030 On-Off Primary Burner Control is a 120V electronic control designed to manage burner operation in compatible commercial and industrial heating equipment. It sequences ignition, monitors flame status, a...