MRCOOL MHK10H Air Handler Heat Kit 10 kW with Circuit Breaker
Location: (Chicago)
The MRCOOL MHK10H Signature Series Air Handler Heat Kit is a 10 kW electric heating accessory with an integrated circuit breaker, designed to provide supplemental heat for compatible air handlers. It operates by energizing electric heating elements to generate warm air as it passes through the air handler, supporting indoor comfort during colder conditions. This heat kit is used with compatible MRCOOL Signature Series air handlers and heat pump systems. Its integrated protection simplifies installation, improves heating capability, supports reliable operation, and helps maintain consistent indoor temperatures.
For an efficient and reliable HVAC system, the MRCOOL MHK10H Signature heat kits with circuit breaker Heat Kit is a great choice for optimal system performance.
#MRCOOL #MRCOOLParts #MHK10H #HeatKit #HVACParts #PartsHnC #FurnaceParts #AirConditionerParts
Visit The Website:
https://www.partshnc.com/mrcool-signature-series-10kw-heat-kit-mhk10h
Website
Email
8667730907 _thumb.jpg)
The Robertshaw TS11K-4512-1-0 Oven Pilot Safety Valve is a gas control component designed to regulate fuel flow to compatible oven and heating appliances. It operates with the pilot safety system to allow gas flow when a proper pilot flame is det...
The Burnham Boiler 81960002 Spray Paint is a 12-ounce coating designed for compatible Burnham boiler equipment and heating system components. Applied directly to suitable exterior metal surfaces, it forms a protective finish that helps shield compo...
The Mitsubishi Electric U41008281 PCA Control Board SVZ is an electronic control board designed for compatible Mitsubishi Electric SVZ series air handlers. It operates by receiving signals from system sensors and coordinating key HVAC components ...
The MRCOOL MRFILTER01 MrBreeze Replacement Filter is a replacement air filter designed for use with compatible MRCOOL MrBreeze MRFAN36 HVAC fan equipment. It works by trapping dust, dirt, and airborne particles as air passes through the filter, h...
MRCOOL MST06 Smart Thermostat is an HVAC control accessory designed to manage compatible MRCOOL heating and cooling systems. It monitors indoor temperature and communicates with the HVAC equipment to regulate operation according to the selected ...
The MRCOOL NV50-3834 Universal Series 50 FT 3/8" x 3/4" Pre-Charged Quick Connect Line Set is a pre-charged refrigerant line assembly designed for compatible MRCOOL ductless and mini-split HVAC systems. It connects the indoor air handle...
_thumb.jpg)
The MRCOOL GCNV-VD00-3834 GeoCool No-Vac Geothermal Pre-Charged Lineset is a factory-prepared refrigerant piping assembly with 3/8-inch liquid and 3/4-inch suction lines for compatible geothermal heat pump systems. It provides a sealed path for r...
MRCOOL MC16-3858 24K BTU Mini Split Flared Line Set is a 16-foot refrigerant line set designed for compatible 24K BTU ductless mini-split HVAC systems. It features 3/8-inch and 5/8-inch copper lines with flared connections that link the indoor ai...
_–_Thermo-Controlled_System_thumb.jpg)
The MRCOOL® MTW04UF is a thermo-controlled water dispenser designed to provide filtered drinking water in residential, commercial, and institutional settings. It uses a four-stage UF filtration process, combining PP sediment, carbon block, UF...
_Actuator_(1)_thumb.jpg)
The Carrier HF26BB030S Non-Spring Return (NSR) Actuator is an HVAC control component designed to regulate dampers and valves in air-handling and ventilation systems. It operates by converting an electrical control signal into mechanical rotation,...
MRCOOL DIYCOUPLER-3858K75 Line Set Coupler Kit is designed to connect compatible 3/8-inch and 5/8-inch refrigerant line sets in ductless mini-split HVAC installations. The coupler creates a secure connection between line set sections, supporting ...
The Nordyne 920916A 2-Stage Control Board G7 is a replacement electronic control board designed for compatible Nordyne HVAC systems. It manages and coordinates key heating system functions, including two-stage heating operation, by processing the...
Yaskawa CIMR-VU4A0009FAA 5HP Variable Frequency Drive is an electronic motor controller designed to regulate the speed and torque of compatible three-phase HVAC motors. Rated at 8.8A and 380–480V, it adjusts the motor’s frequency and ...
_thumb.jpg)
The Crown Engineering EC20420 Eclipse Extension Rod is an HVAC component designed to extend the reach of compatible Eclipse system controls or operating mechanisms. It provides a secure connection between the control point and the equipment, allo...
The First Company 9-315-4-4 8kW Heater is an electric heating component designed for compatible First Company air handlers and HVAC systems. Operating at 240V, it uses electric resistance elements to convert electrical energy into heat, which is ...
The Lochinvar & A.O. Smith 100368388 Natural Gas Pilot Assembly Kit with Tube is an OEM replacement component designed for compatible natural gas water heaters. It works by delivering gas to the pilot burner, creating a controlled flame that ...
The Grundfos 97751533 Valve & Diaphragm Kit is a replacement service component designed for compatible Grundfos SD-S-PV/V/C-1 pressure and water treatment equipment. The kit includes valve and diaphragm components that work together to regula...
The Lennox 27A22 (ECB47-9-P) 9kW Electric Heater Kit is a supplemental electric heating accessory designed for compatible Lennox air handler systems. It works by using electric resistance heating elements to generate heat, which is transferred to...
The Lennox 69W55 2-Stage Pressure Switch is a safety and monitoring component designed for compatible Lennox gas furnaces and HVAC heating systems. It senses pressure changes within the furnace’s combustion or venting system and opens or cl...
The MRCOOL NV35-3834-O No-Vac Pre-Charged Line Set is a 35-foot refrigerant line set designed for compatible MRCOOL mini-split and heat pump HVAC systems using R-454B refrigerant. It connects the indoor air handler to the outdoor condenser, allow...