International Environmental 70021524 Direct Drive Motor 1/20HP 115V

Buisness Email: [email protected]     At Easy Fix Mobile Rv Repair, we understand the frustration of dealing with RV issues on the road. Inspired by our own experiences and driven by a passion for excellence, we are de...

The Hubbell Industrial Controls 69JF9 Pressure Switch is a durable pressure-sensing device designed to monitor and control pressure levels in HVAC and heating systems. It operates by detecting changes in system pressure and automatically opening ...

The International Environmental 70556306 Fan Coil Unit Motor PSC Motor 1/4HP 115 Leadless is a permanent split capacitor (PSC) motor designed for fan coil units used in HVAC heating and cooling systems. It powers the fan that circulates conditio...

The AERCO Boiler and Water Heater 69170 Electric Control System Actuator is a precision control component designed to regulate valve movement in boiler and water heater systems. It converts electrical signals from the control system into mechanic...

The Cozy Heaters 70052 Electrode is an ignition component used in Cozy gas-fired heaters and HVAC heating equipment. It generates a controlled spark that ignites the gas burner, allowing the heater to start and maintain a stable flame during oper...

The Friedrich Air Conditioning 68700193 3.5 kW Heater Kit is an electric heating accessory designed to provide supplemental heat in compatible HVAC systems. With a 3.5 kW heating capacity, it works by converting electrical energy into heat throug...

The International Environmental 70021520 Direct Drive Motor (1/5 HP, 115V) is a high-efficiency replacement motor designed for HVAC air-moving applications. It directly powers the blower or fan without belts, allowing reliable and smooth airflow ...

The PennBarry 63821-0 1-Speed Motor 1/4 HP 115V 1500 RPM is a reliable electric motor designed to power HVAC ventilation and air movement equipment. Operating on a 115-volt power supply, it delivers a consistent 1500 RPM with a single-speed confi...

Looking for a GPS tracker in Michigan to monitor your vehicle or fleet? GPSCOTECH offers advanced tracking solutions with live location updates, instant alerts, and trip history for better visibility. Easy to install and simple to use for personal ve...

The Nordyne 664435R In-Line Drain is a condensate drainage component designed for high-efficiency HVAC heating systems. Installed in the condensate line of gas furnaces or air handlers, it directs and removes moisture produced during the heating ...

The PennBarry 63750-0 1/3 HP 115V 1550 RPM 3-Speed Motor is a durable electric motor designed to power HVAC ventilation and air movement systems. It operates using a 115-volt supply and delivers up to 1550 RPM with three selectable speeds, allowi...

The Nordyne 661128R Inshot Burner is a gas combustion component designed for residential and light-commercial HVAC heating systems. It mixes natural gas with air and directs the mixture into the burner tube, where ignition produces a stable flame f...

The Nordyne 632624 SPST Pressure Switch is a safety control component used in HVAC furnace systems to monitor and regulate air pressure within the venting system. It operates by sensing negative pressure created by the inducer motor; when proper ...

The Packard 66056‑115V 1/15Hp Inducer Motor is a combustion draft inducer motor designed for gas-fired HVAC heating systems such as furnaces and boilers. It operates by driving a blower wheel that pulls combustion gases through the heat exchang...

The Nordyne 632546R Dual Pressure Switch Control is a safety device designed to monitor both high and low pressure conditions within HVAC heating systems. It detects the airflow and draft pressure created by the inducer motor and confirms that pr...

The Nordyne 632487R Pressure Switch (-0.90" Water Column, SPST) is a safety control device designed to monitor airflow and draft pressure in HVAC heating systems. It senses the negative pressure created by the inducer motor and closes its el...

The Nordyne 632445R SPST Pressure Switch (1.10" Water Column) is a safety control device designed to monitor airflow and draft pressure in gas-fired HVAC systems. It senses the negative pressure created by the inducer motor and closes its el...

The Midco International 641800M-J3 Electrode Assembly is an ignition and flame-sensing component designed for use in commercial and industrial gas burner systems. It generates the spark required to ignite the burner and helps monitor flame prese...

The Nordyne 632444R SPST Pressure Switch is a safety control device designed to monitor airflow and pressure within HVAC heating systems. It detects the negative pressure created by the inducer motor and closes its electrical contacts when the pr...

The Nordyne 626428R CO Limit Switch is a safety component designed for use in HVAC furnace systems to monitor carbon monoxide and temperature conditions. It works by detecting unsafe levels or overheating within the furnace and automatically inte...