Heatcraft C25926A2 Drain Pan
Location: (Chicago)
The Heatcraft C25926A2 Drain Pan is an HVAC replacement component designed to collect and direct condensate produced during cooling operations. Installed in compatible Heatcraft refrigeration systems and evaporator units, it captures moisture that forms as warm air passes over the cooling coil and channels the water toward the designated drain outlet. This helps prevent water accumulation, minimize leakage, and protect surrounding equipment from moisture damage. Built for dependable condensate management, the drain pan supports cleaner operation, easier maintenance, and reliable performance in commercial refrigeration and cooling applications.
For an efficient and reliable HVAC system, the Heatcraft Drain Pan is a great choice for optimal system performance.
#Heatcraft #HeatcraftParts #C25926A2 #DrainPan #HVACParts #PartsHnC #FurnaceParts #AirConditionerParts
Visit The Website:
https://www.partshnc.com/heatcraft-c25926a2-drain-pan-12-x-49
Website
Email
8667730907 
The Reznor RZ061145 Pilot Burner with Ignitor and Flame Sensor is a natural gas ignition component designed for compatible Reznor gas-fired unit heaters and HVAC heating equipment. It initiates pilot flame ignition and uses the flame sensor to de...
The Trane CNT08175 Defrost Control Board is an electronic component designed to manage the defrost cycle in compatible Trane heat pump systems. It monitors operating conditions and activates the defrost sequence when necessary, helping remove fro...
The Reznor RZ204611 Electrode Assembly is a replacement ignition component designed to support reliable burner operation in compatible Reznor HVAC heating equipment. It works by producing an electrical spark that ignites the gas-air mixture, hel...
The Trane MOD02616 ECM Engine Control Module is an electronic component designed to regulate the operation of compatible electronically commutated motors in HVAC equipment. It processes control signals and manages motor performance to support pro...
The Reznor RZ061069 1/20 HP Fan Motor is a reliable HVAC replacement motor designed to support efficient air circulation in compatible heating and ventilation equipment. Operating at 3000 RPM with a 115V power supply and 60Hz frequency, it drive...
The Trane PAN01551 Horizontal Auxiliary Drain Pan measures 11 inches by 6.5 inches and is designed for compatible HVAC systems. It collects condensate produced during air conditioning or dehumidification and helps direct excess moisture away from...
The Trane BRK04380 Motor Mount Channel is a replacement mounting component designed for compatible Trane HVAC equipment. It provides a secure support structure for positioning and holding the motor within the unit, helping maintain proper alignme...
The Trane SEN02133 Unprogrammed Temperature Sensor Probe is an HVAC sensing component designed to monitor temperature conditions within compatible Trane heating and cooling systems. It detects temperature changes and provides corresponding signal...
The Trane SWT03335 Thermal Flow Sensor is a 24V AC/DC sensing component designed for compatible HVAC control systems. It uses thermal sensing technology to monitor airflow or fluid movement by detecting changes in heat transfer, providing feedbac...
The Trane BLW00879 Draft Inducer Blower is a replacement component designed for compatible Trane gas furnaces and HVAC heating systems. It operates by drawing combustion air into the burner assembly and safely directing exhaust gases through the ...
The Trane MOD02132 CSTI ECM Adapter Module Board is an electronic interface component designed to support communication and compatibility between the control system and electronically commutated motors (ECMs) in compatible Trane HVAC equipment. I...
The Trane SEN01789 Photoelectric Smoke Detector Sensor is a safety component designed for compatible HVAC and building air management systems. It uses photoelectric technology to detect smoke particles by monitoring changes in light within its se...
The Trane SEN02671 Low Differential Pressure Sensor is an HVAC monitoring component designed to measure small pressure differences within compatible Trane heating, ventilation, and air conditioning systems. It detects variations in pressure betwe...
The Trane WHL02167 Blower Wheel is a replacement HVAC component measuring 10.62 inches in diameter and 10.68 inches wide, with a 1/2-inch bore and counterclockwise rotation. It attaches to a compatible blower motor and rotates to circulate air th...
The Trane BLW01310 Inducer Blower Motor is a high-performance HVAC component designed to support efficient combustion and proper exhaust ventilation in compatible Trane furnaces. Operating at 3480 RPM with 0.50 amps, 208/230V, and 60Hz single-pha...
The Trane BNR01233 Natural Gas Stainless Steel Inshot Burner is an OEM replacement component designed for compatible Trane gas furnaces and HVAC heating systems. Featuring a 0.50-inch inside diameter and durable stainless steel construction, it d...
The Trane COM06434 14-ton compressor is a replacement component designed for compatible Trane HVAC systems, including models CSHA-140K-000 and CSHA-140-00A. It compresses low-pressure refrigerant vapor and circulates it through the refrigeration ...
The Trane FAN03849 2-Blade Fan is a 28-inch diameter aluminum fan with a 30-degree pitch, 1/2-inch bore, and counterclockwise rotation, designed for compatible HVAC applications. It operates by rotating to move air across heat exchange surfaces, ...
The Trane FAN04074 3-Blade Aluminum Fan is a replacement fan component designed to support proper airflow in compatible Trane HVAC equipment. Its three-blade design rotates to move air across the condenser coil, helping dissipate heat and maintai...
The Trane ARM00191 Motor Mount Arm is a structural support component designed to secure and position compatible motors within HVAC equipment. It helps maintain proper motor alignment and stability during operation, supporting effective power tra...