Full Immersion Electric Water Heater for Industrial Tanks – Get a Quote from Process Technology
Location: (Ohio)
Need a dependable solution to heat water, chemicals, or process liquids inside tanks? The full immersion electric water heater from Process Technology is designed for industrial environments that require reliable and controlled heating.
Process Technology manufactures a wide range of electric immersion heaters, including metal heaters, fluoropolymer (PTFE) heaters, quartz heaters, screw plug heaters, and flanged immersion heaters, allowing businesses to choose a heater that matches their process requirements.
Key highlights:
• Built for heating liquids and solutions used in industrial processes
• Available in corrosion-resistant materials such as stainless steel and titanium
• PTFE coated heater options for aggressive or chemical environments
• Built-in over-temperature protection for safe operation
• Designed for consistent heating performance in demanding applications
Flanged immersion heaters from Process Technology are available in multiple flange sizes and power ratings, supporting various industrial heating setups and tank installations.
If your process requires reliable liquid heating with proven equipment, Process Technology offers industrial immersion heater solutions trusted across industries.
Get a quote from Process Technology today and find the right full immersion electric water heater for your application.
Phone: +1(440)-974-1300
Website: https://www.processtechnology.com/product/electric-immersion-heaters/
Address: The Tom Richards Building, 38809 Mentor Ave. Willoughby, OH 44094 USA
Website
Email
+1(440)-974-1300 
The Johnson Controls VA9104-IGA-3S NSR Electric Valve Actuator is a compact, reliable device designed to control the flow of water or steam in HVAC systems. Operating on 24V, it delivers 35 in-lb torque to precisely position valves based on contr...
The Honeywell TP970B2077 is a 2-pipe pneumatic thermostat designed for precise temperature control in commercial HVAC systems. It operates on a reverse-acting mechanism, increasing output pressure as temperature rises to regulate heating or cooling...
The Honeywell TP970A2053 is a 2-pipe direct-acting pneumatic thermostat designed for precise temperature control in HVAC systems. It operates by sensing ambient temperature and modulating air pressure output to control valves or dampers according...
_thumb.jpg)
The Maxitrol TS114F Discharge Air Sensor is a temperature sensing device designed to monitor discharge air in HVAC systems. It operates by detecting air temperature and sending signals to the control system to adjust heating or cooling output acc...
The Trane TRR1998 Transformer is an electrical component designed to supply low-voltage power to HVAC control systems. It works by converting high-voltage input into a stable lower voltage through electromagnetic induction, ensuring safe operatio...
_thumb.jpg){kind=spacer}
The Trane TRR0826 Transformer is an electrical component designed to convert high-voltage power to low-voltage levels for HVAC system controls. It operates by using electromagnetic induction to step down voltage, providing safe and consistent pow...
The TE Connectivity T92P11A22-277 is a 2-pole motor relay designed for high-capacity switching in HVAC and industrial control systems. Operating at 277Vac, it uses an electromagnetic coil to open or close contacts, enabling reliable control of mo...
The TE Connectivity T92P11A22-24 DPDT general-purpose relay is a high-capacity electrical switching device designed for reliable control of circuits up to 30A with a 24V coil. It operates by using an electromagnetic mechanism to open or close dua...
The Resideo T834N1002 is a non-programmable thermostat designed for simple, reliable temperature control in residential and light commercial HVAC systems. Operating on 24V, it supports 1 heat and 1 cool configuration and maintains a setpoint with...
The Resideo T8034N1007 1H/1C Horizontal Thermostat is an automatic control device designed to manage single-stage heating and cooling in HVAC systems. It operates by sensing indoor temperature and switching between heating and cooling modes to ma...
_thumb.jpg)
The Honeywell T775B2016 2 SPDT Temperature Controller is a digital control device designed to monitor and regulate temperature in HVAC systems. It operates by sensing temperature inputs and switching two independent single-pole, double-throw out...
The Honeywell Thermal Solutions ST7800A1054 purge timer is a control device designed to manage pre-purge timing in combustion-based HVAC equipment. It operates by initiating a 60-second purge cycle before ignition, clearing residual gases to ensu...
The KMC Controls SSS-1003 differential pressure flow sensor is a reliable device designed to measure pressure differences and monitor airflow in HVAC systems. It operates by detecting variations in pressure across a system and converting them int...
The Honeywell SP3000-2 PT3000 temperature sensor is a precision device designed to accurately monitor temperature in HVAC systems. Featuring a durable 2-inch probe and 24-inch leads, it detects temperature changes through a platinum resistance el...
_thumb.jpg)
The York S1-7956-336P 1/2" LP/Natural Gas Valve Package is a control assembly designed to regulate gas flow in HVAC heating systems. It operates by opening and closing in response to control signals, ensuring precise delivery of propane or ...
The York S1-025-29041-002 Auto Limit Switch is a temperature-sensitive safety device designed to protect HVAC systems from overheating. It works by automatically opening the electrical circuit when temperatures exceed a preset limit and resetting...
_thumb.jpg)
The York S1-024-39714-000 Pressure Switch is a control device designed to monitor and regulate pressure conditions in HVAC systems. It operates by opening or closing an electrical circuit when pressure reaches preset limits, ensuring safe and eff...
The York S1-024-35780-000 SPNO Air Pressure Switch is a control device designed to monitor airflow and pressure conditions in HVAC systems. It operates by closing a single-pole, normally open electrical circuit when the required air pressure is r...
The Marvair S/07846 CommStat 4 Controller is a programmable HVAC control device designed to regulate heating and cooling operations in Marvair wall-mounted and packaged air conditioning systems. It functions by monitoring temperature conditions and...
_thumb.jpg)
The BASO Gas Products RSDA95A-120C Solenoid Coil is an electrical component designed to control gas flow in HVAC systems. It works by generating a magnetic field when energized, actuating the valve to open or close and regulate gas supply. Commo...