Cutler Hammer-Eaton C25DND330T 3-Pole Contactor 30A 24V
Location: (chicago)
The Cutler Hammer-Eaton C25DND330T 3-Pole Contactor is an electromechanical switching device designed to control power flow in HVAC systems. Operating with a 24V coil, it responds to thermostat signals by opening or closing electrical contacts to start or stop components. Commonly used in air conditioners, heat pumps, and refrigeration units, it controls compressors and condenser fan motors. Its durable construction supports frequent cycling, reduces electrical wear, and ensures reliable operation. This contactor improves system efficiency, enhances equipment lifespan, and provides consistent performance in demanding heating and cooling applications.
For an efficient and reliable HVAC system, the Cutler Hammer-Eaton 3-Pole Contactor is a great choice for optimal system performance.
#CutlerHammer #CutlerHammerParts #C25DND330T #Contactor #PartsHnC #HVACParts #FurnaceParts #AirConditionerParts
Visit The Website: https://www.partshnc.com/c25dnd330t-cutler-hammer-eaton-24vac-30amp-3pole-contactor
Website
Email
8667730907 _thumb.jpg)
The Field Controls CAS-34U Universal Combustion Air System is a mechanical air supply unit designed to provide controlled combustion air for fuel-burning HVAC equipment. It operates by delivering outside air into confined spaces in response to bur...
_thumb.jpg)
The Honeywell C6097A3095 Pressure Switch is a diaphragm-actuated safety control designed to monitor gas or air pressure in HVAC systems. It operates by sensing pressure levels and breaking the control circuit when pressure falls below the setpoi...
The Browning BX35 Gripnotch V-Belt is a durable power transmission component designed to efficiently transfer mechanical energy between pulleys in HVAC systems. Engineered with precision-molded notches, it enhances flexibility, reduces heat build...
The Resideo BP900 Backflow Preventer W/Atmospheric Vent is a compact safety device designed to protect potable water systems in HVAC and plumbing applications. Commonly used in boiler feed lines and hydronic heating systems, it prevents contamina...
_thumb.jpg)
The Browning BX105 Gripnotch Belt is a high-performance cogged V-belt designed for efficient power transmission in HVAC equipment. Commonly used in air handlers, condensers, and ventilation systems, it transfers mechanical energy between pulleys ...
_thumb.jpg)
The Hydrotherm BM-3336 Insulated Base Door is a durable replacement component designed for use in Hydrotherm boiler systems, particularly compatible with R-Series gas furnaces and boilers. Installed at the base of the unit, it functions as a prot...
The Browning BX62 Grip Notched V-Belt is a robust cogged belt engineered for efficient power transmission in HVAC systems. Its notched profile improves flexibility, enabling smooth pulley engagement while reducing heat buildup and energy loss. Co...
The Browning BX58 Grip Notched V-Belt is a high-quality cogged belt designed for efficient power transmission in HVAC systems. Its notched design enhances flexibility, allowing better pulley contact while reducing heat buildup and energy loss. Co...
_thumb.jpg)
The Trane BAYLEGS004 4″ Snow Mounting Legs are support accessories designed to elevate outdoor HVAC units above ground level. Installed beneath condensers or heat pumps, these legs raise the unit to prevent snow, ice, and debris accumulatio...
The Trane BAYCNDTRAP2A In-Line Condensate Drain Kit is a condensate management assembly designed to control moisture removal in high-efficiency HVAC systems. Installed inline with the drain line, it collects condensate produced during operation a...
_thumb.jpg)
The Trane BRG1579 1" Bore Rubber Mount Ball Bearing is a durable, vibration-isolating component designed to support rotating shafts in HVAC systems. It features a rubber-mounted housing that reduces noise and absorbs mechanical shock while m...
_AV-7600_Hydraulic_Actuator_Valve_Linkage_Kit__thumb.jpg)
The Schneider Electric (Barber Colman) AV-600 MA/MP Linkage VB9 VB7 5000 is a valve linkage assembly designed to connect pneumatic or hydraulic actuators to VB7 and VB9 series control valves in HVAC systems. It provides a direct mechanical interf...
The Belimo B210B 2-Way Valve is a compact control valve with chrome-plated trim and a 1/2-inch connection, designed for regulating water flow in HVAC systems. With a 1.2 Cv rating, it precisely modulates or isolates flow when paired with a compat...
_AV-600_Linkage_VB9_VB7_5000_thumb.jpg)
The Schneider Electric (Barber Colman) AV-600 MA/MP Linkage VB9 VB7 5000 is a valve linkage assembly designed to connect pneumatic or hydraulic actuators to VB7 and VB9 series control valves in HVAC systems. It provides a direct mechanical interf...
_thumb.jpg)
The Goodman B1225022S reversing valve coil is a 24V electromagnetic component designed to control the flow direction of refrigerant in heat pump systems. It works by energizing the reversing valve, allowing the unit to switch between heating and co...
Upgrade your turbine system with the reliable IS200VAICH1D control board from Direct Turbine Controls Corp. We supply high quality new and remanufactured boards, fully tested in our advanced lab for performance and durability. Our expert technicians ...
_AV-400_Pneumatic_Actuator_Valve_(1)_thumb.jpg)
The Schneider Electric (Barber Colman) AV-400 Pneumatic Actuator Valve is a linkage assembly designed to connect pneumatic actuators to control valves in HVAC systems. It converts air pressure signals into mechanical motion, allowing the actuator...
_thumb.jpg)
The Kulthorn AZA0413YK1 compressor is a compact 1/6 HP, 115V refrigeration compressor designed for efficient cooling performance in small HVAC and refrigeration systems. It operates by compressing refrigerant gas, raising its pressure and temperatu...
The Resideo AT87A1106 Foot & Plate Mount Transformer is a dependable low-voltage transformer designed to provide consistent 24-volt power for HVAC control systems. It works by converting standard line voltage into regulated low voltage requir...
The Honeywell Resideo AT72D1683 Multi‑Mount Transformer is a durable low-voltage transformer designed to supply stable 24-volt power to HVAC control systems. It works by converting higher line voltage into safe, regulated low voltage required f...