First Company 9EVR410-2 Universal Thermal Expansion Valve (TXV) Kit
Location: (Chicago)
First Company 9EVR410-2 Universal Thermal Expansion Valve (TXV) Kit is a refrigerant flow-control component designed for compatible R410A air conditioning and heat pump systems rated from 42,000 to 60,000 BTU. It regulates refrigerant entering the evaporator coil according to system load and superheat conditions, supporting proper heat transfer and efficient operation. Used with compatible HVAC air handlers and split systems, this TXV helps maintain stable cooling performance, protect the compressor, improve energy efficiency, and provide consistent temperature control during system operation, service, and replacement.
For an efficient and reliable HVAC system, the First Company Universal Thermal Expansion Valve Kit is a great choice for optimal system performance.
#FirstCompany #FirstCompanyparts #9EVR410-2 #Kit #PartsHnC #HVACParts #FurnaceParts #AirConditionerParts
Visit The Web site:
https://www.partshnc.com/first-company-9evr410-2-unv-txv-kit-42-60-r410
Website
Email
8667730907 
The First Company M209 1/4HP Motor 1600 RPM is a reliable replacement motor designed to provide efficient and consistent operation in HVAC equipment. Operating at 1600 RPM, the motor converts electrical energy into mechanical rotation to drive th...
The Trane KIT18707 Replacement Fan Bracket Kit is a genuine OEM support assembly designed to secure the fan motor within compatible Trane XL and XLi outdoor air-conditioning and heat pump units. The kit includes motor-mount support brackets, vibr...
Arrco AR57KP-BFV 5 Ton Scroll Compressor is a refrigeration compressor designed for compatible R22 air conditioning and HVAC systems. Operating on 208–230V single-phase power, it compresses low-pressure refrigerant vapor and circulates it t...
Explore reliable Toroidal Transformers designed for efficient power conversion, low electromagnetic interference, compact construction, and dependable performance across audio, industrial, medical, and electronic applications.
Rheem-Ruud AP17940-1 Condensate Water Sensor is a monitoring component designed for compatible Rheem-Ruud air conditioning and heat pump systems. It detects the presence or level of condensate water in the drain pan or condensate management area ...
_RP45001_Drain_Pan_thumb.jpg)
The Texas Furnace (Consolidated Ind) RP45001 Drain Pan is a replacement condensate drain pan designed for compatible Texas Furnace HVAC equipment, including furnaces and air-handling systems with cooling coils. It collects condensation produced d...
The Nortec Humidity 2600817 Steam Nozzle is a replacement component designed for compatible Nortec steam humidification systems. It distributes generated steam into an HVAC air stream, allowing moisture to mix evenly with conditioned air for cont...
The LAU 0574310002M Blower Assembly A10-8ACE is a belt-driven HVAC blower assembly designed to deliver reliable airflow in residential and light commercial heating, cooling, and ventilation equipment. It uses a 3/4-inch shaft, blower wheel, and ...
The First Company T4071 Aqua Stat is a strap-on aquastat designed to monitor and control water temperature in hydronic HVAC systems. It mounts directly to 5/8-inch outside-diameter tubing and senses pipe temperature to regulate system operation. ...
The Gree 76512051 End Bearing is an OEM support component designed for the indoor fan assembly of compatible Gree air conditioners and heat pumps. It functions as an end support for the cross-flow fan, helping maintain proper shaft alignment whil...
The Secop Diversitech SCE18CNLX-1 LBP Compressor Kit is a low-back-pressure compressor designed for refrigeration systems using R290 propane refrigerant. Operating at 115V and 60Hz, it compresses low-pressure refrigerant vapor and circulates it t...
The Secop Diversitech 117U7013 Start Relay is a current-operated electromechanical relay designed to provide reliable starting control for compatible refrigeration compressors. It works by energizing the compressor’s start winding during st...
The GREE XK60 Wired Controller is a wall-mounted control interface designed for compatible GREE commercial air conditioning systems. It connects directly to the indoor unit, allowing users to adjust temperature, operating mode, fan speed, and tim...
The York S1-8HK16500806 7.68kW Electric Heater Kit with Breaker is an auxiliary electric heating component designed for compatible York air handlers and indoor HVAC systems. It uses electric resistance heating elements to generate supplemental he...
The Nordyne 626459R Limit Switch L190-50F is a temperature-activated safety component designed to protect compatible gas furnaces from overheating. It monitors operating temperature and opens the electrical circuit when the temperature reaches a...
The BROAN-NuTone S1108439 Blower Assembly is a complete OEM ventilation component that includes the motor, blower wheel, and scroll housing. The motor rotates the blower wheel to move air efficiently through the ventilation system, supporting co...
The Suntec B2VA8241B 2-Stage Oil Pump is a high-capacity fuel pump designed to deliver controlled oil flow and pressure to oil-fired burner systems. Operating at 3450 RPM with right-hand rotation, it uses a two-stage design to support reliable fu...
The Navien 30014189C Flame Rod Assembly is a genuine OEM ignition and flame-sensing component designed for compatible NHB Series condensing gas boilers. It uses an electrical spark to ignite the gas at the burner and helps the control system veri...
The Bradford White 415-54156-01 SOLA Ignition Control Module is a factory OEM electronic control component designed to manage ignition functions in compatible gas-fired water heaters. It controls the spark ignition sequence and works with the bur...
Trane KIT16534 Communicating Power Pack Door is a replacement access panel designed for compatible Trane HVAC communicating power pack assemblies and control equipment. It covers and protects internal electrical components while providing access ...