Kitchen Appliances Classified Ads in USA

The Mitsubishi Electric E2207E620 Indoor Heat Exchanger is a high-efficiency component designed for heat transfer in ductless mini-split and VRF indoor units. It works by circulating refrigerant through precision-engineered coils to absorb heat f...

The Bakers Pride M1008X Pressure Regulator delivers reliable gas flow control to ensure safe, consistent performance in commercial cooking equipment. Designed for 3/4" natural gas lines, it adjusts inlet pressure to a stable 3"–6"...

The LG EBR31002605 Dryer PCB Assembly is an electronic control component designed to manage the dryer’s operating cycles and coordinate signals between internal systems. It operates by processing inputs from sensors, buttons, and safety switche...

  The Mitsubishi Electric E22E34301 8-Pole Motor is a high-efficiency DC motor designed for reliable performance in Mitsubishi HVAC systems. Operating at DC 280V with a 77W output, it drives fan assemblies to ensure consistent airflow...

The American Range A11121 NAT/LP Pilot Kit provides a dependable solution for reliable ignition of gas ranges. This pilot kit works by safely directing natural gas or liquid propane to the pilot burner, creating a stable flame that ignites the main ...

The LG EBR30299301 Refrigerator Main PCB Assembly is an electronic control component designed to manage and coordinate the operation of key cooling and defrost systems. It operates by processing signals from sensors and distributing power to fans, ...

The Mitsubishi Electric E22D21444 Noise Filter Printed Circuit Board is a high-quality electronic component designed to reduce electrical interference within HVAC systems. It works by filtering power line noise and protecting sensitive circuitry,...

The System Sensor DST5 5' Sampling Tube with Holes is a precision-designed component used with duct smoke detectors to draw air efficiently from HVAC ducts for reliable smoke detection. Its pre-drilled holes ensure consistent airflow sam...

The Montague 1040-5 Pressure Regulator 3/4" LP ensures consistent and reliable gas flow to support safe and efficient equipment performance. This regulator is designed to control and maintain proper pressure levels in low-pressure LP gas system...

The Garland 1028288 1/4" Oven NAT/LP Pilot Orifice provides steady and controlled ignition to help maintain consistent oven performance. Designed for natural gas or propane systems, this pilot orifice regulates the flow of fuel to prod...

The Southbend 1054196 Range Pilot Kit NAT/LP provides a reliable solution for maintaining consistent ignition performance in commercial gas ranges. Designed to supply a steady pilot flame, the kit works by delivering controlled gas flow to the pilot ...

The American Range A11124 NAT/LP Pilot Assy with Left Flame Pattern provides reliable ignition for commercial cooking equipment, ensuring consistent burner performance in demanding kitchen environments. This pilot assembly functions by deli...

The LG EBF62174907 Range Rotary Switch is an electrical component designed to control the selection of burner settings on compatible range systems. It operates by rotating an internal contact mechanism that adjusts power levels sent to the heating ...

The Groen 101570B Pressure Regulator 3/4" LP is a dependable, high-quality regulator designed to ensure steady and accurate low-pressure gas flow for commercial kitchen equipment. Its 3/4-inch connection provides broad compatibility with LP gas ...

The Samsung DG94-04082A Range Door Module is a structural component that manages the movement and alignment of the oven door for steady, accurate operation. It operates by coordinating the door’s opening and closing motion, ensuring the hinge...

The Blodgett 10248 Pressure Regulator 3/4" LP provides reliable control of low-pressure gas flow to help maintain steady performance in compatible commercial kitchen equipment. This regulator works by reducing incoming gas pressure to a consiste...

The Resideo DP2020A5022 2-Pole Relay 20A 24V is a durable switching device designed for reliable control of HVAC components such as condenser units, heat pumps, and air handlers. Operating on a 24V coil, it provides stable contact performance to mana...

The Honeywell DC120L10001000 Universal Digital Controller is a versatile control device designed for precise temperature and process regulation in HVAC applications. It works by receiving sensor inputs, processing data, and delivering accurate ou...

The Southbend 1168263 Pilot provides reliable ignition support by delivering a steady flame source that helps ensure consistent burner performance in commercial cooking equipment. Designed for straightforward functionality, this pilot assembly operat...

The Carrier DAMPACT90DEGR Damper Actuator 10 lb-In is a compact, reliable device designed to control airflow in HVAC duct systems. It operates by delivering precise torque to open or close dampers based on signals from the building’s contro...

The Market Forge 09-1150 Pressure Regulator ensures steady and accurate natural gas flow, helping equipment operate safely and at optimal performance. This regulator is designed for 1/2" FPT connections and maintains a consistent 4" WC outl...

The Vulcan Hart 00-414645-00001 Oven Pilot Assembly provides reliable ignition support to ensure consistent burner operation in commercial ovens. This component functions by supplying a steady pilot flame that ignites the main burner whenever heat i...

The Edlund KT1200 Replacement Parts Kit with gear, knife, and two screws restores dependable cutting performance to compatible manual can openers. This kit functions by replacing worn components, allowing the gear to rotate smoothly and the...

The IO HVAC Controls CS-55-WP Heating Application 55°F is a temperature control switch designed to activate heating systems when ambient temperatures drop to 55°F. It works by sensing air temperature through an internal thermostat and automat...

The American Range A80011 Pressure Regulator 3/4" LP provides reliable control of low-pressure gas flow to help maintain consistent performance in compatible commercial cooking equipment. Designed for 3/4" LP gas lines, this regulator work...

The Cecilware F180A 1/4" Tube NAT/LP Pilot, 3 Way Flame provides stable pilot ignition to support consistent burner operation in commercial gas equipment. This pilot assembly uses a 1/4-inch tube to supply natural or LP gas to a three-way flame ...

The Armstrong International D9022 Lithium Battery 6V CR-P2 is a long-lasting power source designed for dependable operation of Armstrong HVAC and steam system monitoring devices. It delivers stable voltage output, ensuring accurate performance of...

The Montague 36174-7 Oven Valve provides precise control over gas flow, ensuring safe and consistent heating performance in commercial oven applications. This valve functions by regulating the amount of gas delivered to the burner, allowing the appli...

The Supco CP801 Commercial Condensate Pan is a 1.75-quart electric pan heater designed to prevent condensate water from freezing and overflowing in HVAC systems. Operating at 120V and 400W, it works by gently heating collected water to promote evapor...

The ROYAL RANGE 3232 1/4" Tube NAT/LP Pilot, 3 Way Flame provides dependable ignition control for commercial gas cooking equipment. Designed to deliver a stable pilot flame, it channels natural gas or liquid propane through a 3-way configuratio...

The Regal Rexnord Fasco D133 General Purpose Motor is a compact and efficient 1/20 HP motor designed for reliable airflow support in HVAC systems. Operating at 115V and 1500 RPM with a 3.3-inch frame, it drives small fans, blowers, and ventilation ...

The Vulcan Hart 00-920041-00012 oven 1/4" tube left flame pilot assembly with orifice provides steady and dependable ignition to help maintain consistent burner performance. This assembly includes a pilot tube and precisely sized orifice that re...

The Rankin Delux RDLR-06B LP Gas Pressure Regulator ensures steady and reliable gas flow to support safe and efficient equipment performance. This 1/2" regulator is designed to control incoming gas pressure, reducing a 1/2 lb inlet supply to a c...

The Blodgett 4701 Oven Rack offers sturdy and reliable support for pans and trays, helping maintain efficient and organized cooking inside commercial ovens. This nickel-plated rack is built with a 20.81" front-to-back depth, 28.25" left-to-...

The Star Mfg 2V-80501-10 is a 1/2" FPT natural gas pressure regulator designed to provide stable, reliable gas flow at 3–6" WC for safe and efficient equipment operation. This regulator works by reducing incoming gas pressure to a co...

The Garland 4522409 Oven Rack 25-7/8"W x 20-1/2"D provides a sturdy and reliable surface for cooking and baking in commercial ovens. Designed to fit securely within compatible Garland oven models, it allows even heat circulation a...

The Hobart 00-347995-00003 Pressure Regulator delivers stable LP gas flow at 1/2", helping ensure consistent appliance performance in commercial kitchen applications. Designed to control and maintain the proper outlet pressure, this regulator wo...

The Milwaukee 14-29-9001 Gearbox Assembly provides reliable power transfer to help maintain smooth and consistent tool performance. This replacement assembly is designed to house and coordinate the internal gears that control motion, allowing your eq...

The Trane CNT8120 Furnace Control Board is a two-stage electronic control module designed to manage ignition, heating cycles, blower operation, and safety functions in gas furnaces. It works by receiving signals from thermostats and sensors to preci...

The Southbend 1163869 Range Pilot Burner for natural gas provides reliable ignition to keep commercial cooking equipment operating safely and consistently. This pilot burner delivers a steady flame that lights the main burners when needed, using a si...

The Vulcan Hart 00-412787-00001 Range Pilot NAT/LP provides reliable ignition control for commercial gas ranges, helping ensure consistent burner performance and dependable startup. Designed to regulate the flow of natural or LP gas to the ...

The Garland 1415301 NAT/LP pilot burner provides reliable flame ignition to support consistent operation in compatible gas cooking equipment. Designed for use with 3/16" and 1/4" tubing, it delivers a steady flame pattern that helps maintai...

The Superior Radiant CE024 Air Pressure Switch with bracket is a precision safety and control device designed to monitor airflow and pressure levels in radiant heaters and commercial HVAC systems. Operating at 0.25" WC, it activates or inter...

The Henny Penny 16253 NAT Gas Pressure Regulator provides reliable control of gas flow to ensure consistent fryer or cooking equipment performance. Designed as an adjustable regulator, it converts LP to natural gas and stabilizes outlet pressure with...

The Garland 1028298 NAT/LP Oven Pilot provides a steady, dependable flame source to support reliable ignition in ovens operating on either natural gas or liquid propane. Designed for compatibility with select commercial units, this pilot assembly del...

The Frymaster 8170099 LP Gas Pressure Regulator provides reliable control of gas flow to ensure consistent fryer performance and safe operation. Designed to regulate liquid propane pressure at a steady 11" WC and adjustable from 8" to 12&qu...

The Superior Radiant CE003 Sense PSE-SP1 Probe is a dependable sensing component designed to monitor temperature conditions in radiant heating and HVAC systems. It works by detecting heat levels and sending accurate signals to the system’s co...

The Frymaster 8102032 Fryer Pilot Burner is designed to provide reliable ignition for commercial fryers using natural gas. Featuring a 1/4" tube size, it functions by producing a steady flame that ignites the main burner when needed, ensuring co...

The Southbend 1053900 NAT Gas Pressure Regulator helps maintain consistent 3.5" WC gas pressure to ensure safe and efficient equipment performance in commercial kitchens. This regulator is designed to control and stabilize the flow of natural ga...

The Ariens Company 20001462 Recoil Starter JPC provides reliable, manual engine starting performance for compatible outdoor power equipment. Designed as a pull-start mechanism, it works by engaging the engine’s crankshaft through a retractable ...