Kitchen Appliances Classified Ads in USA

The Imperial 1607 Rock Broiler Single Pilot Valve is a gas-control component used within compatible commercial broiler pilot assemblies. Its 1/8-inch MPT inlet and 3/16-inch CCT outlet provide the specified connection points for the incoming gas li...

The Whirlpool W10165294RB Trash Compactor Bags provide a suitable liner for compatible trash compactors, supporting cleaner and easier waste handling. Designed to fit inside the compactor drawer, these bags collect compressed household waste and ...

The TRUE 978607 refrigerator power cord with door is designed to provide a dependable electrical connection for compatible commercial refrigeration equipment. This replacement component supports power delivery to the refrigerator while incorporating ...

The Star Mfg 2E-Z2935 griddle power cord is designed to provide a dependable electrical connection for compatible commercial griddle equipment. Rated at 20 amps, this replacement cord supports reliable power delivery between the equipment and its ele...

The Garland 1086597 Fryer Adjustment Pilot Gum Valve is a compact gas-control fitting used in compatible commercial fryer pilot assemblies. Its 1/8-inch MPT connection and 3/16-inch CCT connection provide the specified interfaces for the adjoining ga...

The Hoshizaki 4A0176-01 Sanoprene Plug is a molded sealing component used within compatible Hoshizaki equipment assemblies. Its flexible Sanoprene material allows the plug to seat against the surrounding surface and close the designated opening in ...

The Hatco R02.13.349.00 potentiometer is designed to provide adjustable electrical control in compatible commercial foodservice equipment. As a variable resistor, the component allows the connected control circuit to adjust an operating parameter thr...

The BKI LH0001 Porcelain Socket provides the mounting and electrical connection point for a compatible lamp within commercial foodservice equipment. Its porcelain housing surrounds the socket assembly and provides a heat-resistant mounting structure ...

The Frigidaire 5304536278 Washer Suspension Rod supports the washer tub and helps maintain its proper position during operation. This mechanical component connects the tub assembly to the washer cabinet and works with the suspension system to a...

The Server Products 82013 piston and stem assembly is designed to support consistent dispensing operation in compatible commercial foodservice equipment. The assembly works as part of the dispensing mechanism, with the piston and stem coordinating mo...

The Alto-Shaam RP-3952 Porcelain Socket is an electrical lamp socket used in compatible commercial foodservice equipment. Its porcelain body provides the mounting structure for the associated lamp while the internal contacts establish the electrica...

The Samsung DG94-01139C Oven Main Door Hinge supports proper opening and closing of the oven door. This mechanical part connects the door to the oven frame and provides the pivoting movement needed to open the door and return it to the closed po...

The Garland 1027800 is a plate-mount caster with a 4-inch rubber wheel for compatible commercial range equipment. Its mounting plate provides a secure attachment point beneath the equipment, while the rubber wheel allows the range to move across the ...

The Frymaster 8102805 Swivel Caster is a plate-mounted wheel component used with compatible commercial fryer filter pan assemblies. Its swivel design allows the filter pan to change direction as it is moved, while the plate mount provides the connect...

The Whirlpool W11490736 Washer Lid Assembly provides the top cover needed to close and protect the washer’s tub during operation. Designed for compatible washing machine models, this assembly fits over the upper portion of the appliance and...

The Delfield 3234229 Refrigerator Pivot Hinge Bracket is a bottom right-hand mounting component used within compatible commercial refrigeration door assemblies. The bracket provides a fixed mounting point for the pivot hinge, allowing the door assem...

The Star Mfg WS-8600-15 plastic faucet provides a practical water-dispensing solution for compatible commercial foodservice equipment. Its straightforward design supports convenient water control during routine kitchen, cleaning, and equipment-mainte...

The Vulcan Hart VH961358 oven heating element is a replacement component for compatible commercial ovens requiring a 120V, 1KW heating element with 96-inch leads. It supplies heat for the oven’s cooking operation and can be considered when the ...

The Grindmaster 2231 plastic drip pan is a replacement component for compatible commercial beverage and coffee equipment. The pan collects drips and small amounts of liquid beneath the dispensing area, helping keep the surrounding equipment surface c...

The Jade Range 4613100100 Pilot Burner is a natural and LP gas ignition component used within compatible commercial range burner assemblies. Its 90-degree left-flame configuration positions the pilot flame toward the designated burner ignition area, ...

The Duke 153923 Pilot Burner Igniter Assembly combines a pilot burner with its ignition components for use within compatible commercial cooking equipment. The assembly establishes the pilot flame at a designated point near the main burner, while the ...

The Alto-Shaam CS-2026 swivel plate caster features a 5-inch grey polyurethane wheel with an integrated brake for commercial foodservice equipment. Its swivel design supports smooth directional movement, while the plate-mount configuration provides a...

The Duke 153922 Pilot Burner Igniter Assembly combines the pilot burner and ignition components within a compatible commercial cooking equipment burner system. The assembly provides the ignition point where the pilot flame is established before gas r...

The American Range A29206 pilot tube and tip assembly provides a dedicated gas passage for compatible commercial cooking equipment. The tube directs fuel toward the pilot area, while the tip helps regulate the gas flow at the pilot point. This assem...

The Southbend 1176664 Natural Gas Pilot Burner is a gas ignition component used within compatible commercial cooking equipment. It produces a controlled pilot flame that provides the ignition point for the main burner when natural gas reaches the bur...

The Southbend 1160410 Range Pilot Assembly is a burner ignition component used within compatible commercial range equipment. The assembly provides a controlled pilot flame near the main burner, allowing the incoming gas supply to ignite at the desig...

The Rankin Delux RDLR-13 broiler pilot tube is designed to provide a controlled gas passage within compatible commercial broiler pilot assemblies. The tube directs fuel toward the pilot burner, supporting consistent pilot flame operation and reliable...

The Southbend 1183605 range rear pilot tube is designed to support reliable gas flow within compatible commercial range pilot assemblies. As part of the pilot system, the tube provides a dedicated passage for fuel to reach the pilot burner, helping m...

The Royal Range 3232 Fryer Pilot is a three-way flame pilot component used within compatible commercial fryer burner assemblies. It supports natural gas or LP fuel configurations and connects with 1/4-inch tubing for the designated gas supply path....

The Blodgett BL18225 Oven Timer 60 Min 120V is a timing control component used with compatible commercial oven equipment. It allows the operator to set a cooking period and provides an audible or control response when the selected interval is reached...

The Blodgett 5387 oven LP pilot burner orifice is designed to support controlled fuel delivery within compatible commercial gas oven pilot assemblies. With a 0.010-inch orifice specification for LP applications, this precision component regulates the...

The Prince Castle 541-1185S Main PCB Kit DHB2SS-33SNC is an electronic control assembly used with compatible commercial food holding equipment. The main printed circuit board coordinates electrical signals between connected controls, sensors, switche...

The Amana 14114048 Magnetron Kit is a microwave heating component set used with compatible commercial microwave equipment. The magnetron generates microwave energy that transfers into the cooking chamber to heat food during operation. As part of the ...

The Taylor Freezer 47518 Freezer Sanitary Lubricant 4Oz is a maintenance lubricant used with compatible commercial freezer equipment. It can be applied to designated moving or sealing components where lubrication is required during equipment service....

The Royal Range 2516 Male Elbow is a threaded plumbing fitting used with compatible commercial cooking equipment for connecting pipe sections at an angled junction. Its elbow configuration changes the direction of the connected line while maintaining...

The Imperial 30292 Range Male Elbow is a brass 90-degree connection fitting used within compatible commercial range assemblies. Its angled configuration changes the direction of the connected line while providing a threaded connection between adjoini...

The perforated kettle strainer separates larger food particles from liquid during draining and transfer operations. This stainless-steel component has a 9-inch diameter, .190-inch perforations, and a 7-inch handle for convenient handling around comme...

The Henny Penny 30094 Fryer Compression Fitting is a connection component used within compatible commercial fryer assemblies. Its compression-style connection secures the associated tubing while maintaining the intended pathway between connected com...

The oven door gasket forms a sealing barrier around the door opening, helping limit heat and air loss during operation. This replacement component is made for selected Duke commercial oven applications, including AHPO, PBC, and TSC series equipment. ...

The Frymaster 8130340 Fryer Adaptor is a brass connection fitting used within compatible commercial fryer assemblies. It provides a transition between a 1/8-inch NPT threaded port and 1/8-inch tubing, allowing the connected line to interface with the...

The Blodgett 21098 Oven Catch Assembly is a door hardware component used with compatible commercial oven equipment. It engages with the corresponding door hardware to help keep the oven door securely positioned during operation. The assembly is insta...

The Stero A102054 dishwasher micro switch assembly provides a dependable switching point for compatible commercial dishwashing equipment. Designed to respond to mechanical movement within the machine, the switch can help control or signal specific o...

The Delfield 2162717 refrigerator fan motor is designed to support dependable air circulation in compatible commercial refrigeration equipment. Operating at 115V with a 9W rating and clockwise rotation, this motor drives the fan assembly to help dist...

The Montague 20531-1 Oven Cast Iron Radiant 20 3/4" X 3-1/2"W X 2-1/2" High & 1/4" Legs is a cast iron radiant used inside compatible commercial oven equipment. It sits within the burner area and transfers heat toward the cook...

Keep compatible commercial toaster equipment operating reliably with a dependable drive motor designed for continuous foodservice use. The APW 85149 provides 208-240V electrical operation and converts supplied power into mechanical rotation to drive ...

The T&S Brass B-2282-RK Dipperwell Faucet Parts Kit contains service components used with compatible commercial foodservice faucet assemblies. These parts support the operation and maintenance of a dipperwell faucet, helping maintain proper water...

The Blodgett 36606 pressure lock is a replacement door component designed for compatible commercial convection ovens. Measuring approximately 22 1/2 inches long, it attaches to the side of the oven door and helps maintain a secure door position duri...

The Waring/Qualheim 030443 Printed Circuit Board Assembly is an electronic control component used with compatible commercial foodservice equipment. The board carries and coordinates electrical signals between connected controls, switches, sensors, a...

The Montague 15366-4 Drip Pan 24" X 31-1/8" is a collection pan used with compatible commercial cooking equipment to catch food particles, grease, and liquid beneath the cooking area. Its broad rectangular format provides coverage across ...

The Hatco 02.12.004.00 motor is a 120V, single-phase component rated at 1 RPM for selected commercial equipment applications. When servicing equipment, compare the motor voltage, phase, speed, mounting arrangement, and application with the existing u...