Kitchen Appliances Advertising Ads – Free Classified Ads

The Garland CK1035197 Range Steel Infrared Burner is a high-heat cooking component designed for compatible parts used in commercial systems. Measuring 15" x 6-1/4" and equipped with 1.5" extensions, it works by channeling gas through ...

The Vulcan Hart 22018 Quartz Element provides consistent radiant heat to support reliable warming and cooking performance in commercial kitchen equipment. Manufactured by Vulcan Hart, this heating element operates at 208 volts with a 1050-watt out...

The Garland CK2200211 High-Tension Wire Lead 12" ensures reliable ignition for commercial kitchen equipment, providing consistent electrical connectivity to the burners. This 12-inch wire lead transmits high-voltage sparks from the ig...

The Crock Pot 187660000000 Slow Cooker Inner Pot with Handles is a replacement cooking container used in compatible slow cookers to hold and heat food during extended cooking cycles. This inner pot fits inside the heating base and comes with side h...

The Dormont T4-KIT-30 flex tube kit provides a secure and flexible connection for gas and pilot lines in commercial kitchen equipment. This kit includes a 1/4" x 30" stainless steel flex tube, compression nuts, and a male breakaway fitting ...

The Frymaster FM8263668 Fryer Ignition Module Kit Full VAT provides reliable electronic ignition control to help ensure consistent and safe burner operation in commercial fryers. This ignition module kit is designed to manage the ignition sequence by...

The Garland 4530036 Linear Actuator is a motion-control component designed to operate the lifting and lowering mechanism of compatible parts used in commercial systems. Running on 90 VDC at 3300 RPM with a 1.5-amp draw, it works by converting electri...

The Vollrath / Idea-Medalie 59844 Quartz Heater provides efficient and consistent heat generation for compatible commercial foodservice equipment. Manufactured by Vollrath, this heating element operates at 104 volts and 800 watts and measures appro...

The Wells 64485 Element Pan Assembly is a replacement heating component designed to deliver consistent and reliable heat in compatible commercial foodservice equipment. Built to operate on 208/240V with 1200 watts of power, this 17" x 12" x...

A refrigerator PCB assembly kit is used to regulate and coordinate the electronic operations of compatible refrigerator systems. This kit typically includes a printed circuit board and related elements that manage signals between sensors, compresso...

The Garland 30Z1177 20A Fuse provides essential electrical protection for commercial kitchen equipment by helping prevent damage caused by power surges or overloads. This 20-amp fuse is designed to safeguard compatible Garland appliances ...

The Dormont T4-KIT-24 flex tube kit provides a durable and flexible connection for gas or pilot lines in commercial kitchen equipment. This kit includes a 1/4" stainless steel flexible tube along with the necessary fittings designed to connect a...

The Vollrath / Idea-Medalie 17362-1 Drain Adapter provides a secure connection for directing wastewater away from compatible foodservice equipment. Designed with a 3/4" MPT fitting and a 3-1/2" top flange, this component connects the equi...

Burner replacement parts for stoves and ranges restore proper heat generation and support stable cooking performance in compatible appliances. These parts typically include burner heads, caps, igniters, and related components that regulate and dist...

The Garland 1415702 Oven Safety Valve is a gas-control security component designed to regulate and protect the gas supply used in commercial systems. Featuring a 3/8" FPT connection with a 3/16" pilot tube, it works by allowing gas to flow ...

The Garland CK4528835 Open Top Knob Assembly provides precise control over burner settings, making it an essential component for maintaining efficient commercial kitchen equipment. Designed for compatible Garland GT and UT series ranges, th...

The Dormont T3-KIT-30 flex tube kit provides a flexible and reliable connection for gas and pilot lines in commercial kitchen equipment. This kit includes a 3/16" x 30" stainless steel flex tube, compression nuts, and a male breakaway fitti...

The Electro Freeze HC199032-01 Duckbill Inlet Valve with Remountable Mounts helps maintain controlled fluid flow and prevents backflow in compatible equipment. Designed with a flexible duckbill-style opening, this inlet valve allows liquid to pass th...

The Garland 222024 Range Cast Iron Radiant is a heat-distribution component designed for use in commercial systems. Measuring 19-1/2" long, 3-1/2" wide, and 2" high, it sits above the burner where it absorbs and radiates heat across th...

The Garland 1906003 Cable Assembly is an electrical probe extension designed to support accurate temperature sensing used in commercial systems and cooking equipment. Its primary function is to connect and extend the temperature probe to the control ...

The Samsung DE07-00130B Range LED Display is a control panel display component used to present operational information on compatible Samsung ranges. This LED display board shows settings such as temperature, timer values, and cooking modes, allowi...

The Vita-Mix VM1152 Wet Blade Assembly is designed to efficiently process liquid-based ingredients in compatible commercial blenders. This blade assembly features precision laser-cut, hardened stainless-steel blades with sealed bearings that rota...

The Dormont T3-KIT-24 stainless steel flex tube kit provides a secure and flexible gas connection for commercial kitchen equipment while supporting safe operation. This kit includes a 3/16" stainless steel flexible tube and a breakaway fitting d...

The Garland GL1686711 Oven 2-Speed Blower Motor is a reliable component designed to support consistent airflow in commercial kitchen equipment. Built with dual-speed functionality (1725/1140 RPM) and a 0.75/0.21 HP motor, it helps circula...

The Garland 1906003 Cable Assembly is an electrical probe extension designed to support accurate temperature sensing used in commercial systems and cooking equipment. Its primary function is to connect and extend the temperature probe to the control ...

The Samsung DD82-01360A Dishwasher Upper Assembly is used to restore proper dish placement and water distribution in compatible dishwashers. This upper rack assembly holds cups, glasses, and small kitchen items while positioning them for effective ...

The Vita-Mix 015287 3HP Motor Assembly 120 VAC is designed to provide the mechanical power needed for commercial blender operation. This motor assembly converts electrical energy from a 120-volt power supply into rotational motion that drives the ...

The Garland 1415703 Oven Safety Valve 3/8" FPT x 3/16" Tube is an essential component in commercial kitchen equipment, designed to regulate gas flow and enhance oven safety during operation. This safety valve automatically control...

The Crown Steam 5986-1 gasket helps create a secure seal around the heating element, supporting efficient and reliable operation in commercial steam cooking equipment. This gasket is designed to fit around the element connection point, forming a tigh...

The Samsung DD82-01320A Dishwasher Lower Basket Assembly provides a replacement rack designed to hold dishes and cookware in the lower section of compatible dishwashers. This basket supports plates, bowls, and larger utensils while allowing water a...

The Garland 1046289 Gas Valve is a manual burner control part designed to regulate the flow of natural air used in commercial cooking equipments. Featuring a 1/8" MPT inlet and a 3/8"-27 outlet, it works by rotating the valve stem to open o...

The Taylor Freezer X31602 358 Probe is designed to provide reliable temperature sensing in compatible Taylor freezer and soft-serve machines. This probe functions as a thermistor sensor that detects temperature changes inside the freezing cylinder ...

The Continental Refrigerator 20207 hinge assembly supports smooth and stable door movement in compatible commercial refrigeration units, helping maintain a proper seal and consistent cooling performance. This replacement hinge is designed to securely...

The Garland 1046287 Gas Valve 1/8" MPT ensures controlled gas delivery for safe and consistent performance in commercial kitchen equipment. Designed with a 1/8" male pipe thread connection, this valve regulates the flow of gas to ...

The Vulcan Hart 80025 Steamer Pressure Gauge helps ensure accurate pressure monitoring for reliable steamer operation in commercial kitchen equipment. Designed with a 2-inch diameter dial and a pressure range of 0–30 PSI, it provides a clear a...

The Samsung DC96-01414A Washer Drain Pump Assembly provides a replacement solution for removing wastewater from compatible washing machines during drain and spin cycles. This component operates by using an internal motor-driven impeller that moves ...

The Garland 1046288 Burner Gas Valve is a control component designed to regulate the flow of gas to burners used in commercial cooking equipment such as griddles and fry tops. Featuring a 1/8" MPT inlet and a 3/8"-27 outlet with hood orific...

The Star Mfg 2J-0028200 Pressure Regulator Natural Gas 3/4 inches is designed to maintain that stability. This regulator connects through 3/4" FPT gas inlet and outlet ports and controls natural gas pressure typically within a 3"&ndash...

The Tri-Star TS-1096 36" Thermopile provides a dependable millivolt power source that ensure safe and consistent ignition in gas-powered commercial equipment. This thermopile features a 36-inch lead with two wires and generates between 250 and...

The Bakers Pride N141261 Rocker Switch provides a simple and reliable way to control power in compatible commercial kitchen equipment. Designed for easy operation, this switch works by rocking between on and off positions to open or close the electri...

The Garland 2127500 Pressure Regulator provides stable gas pressure control for commercial kitchen equipment. Designed with a 3/4" connection for LP gas systems, this regulator helps maintain consistent fuel flow to compatible charbroi...

The Samsung BN94-12484X TV Main PCB Assembly functions as the central control board that manages core operations in compatible Samsung televisions. This main printed circuit board coordinates signal processing, input management, and communication ...

The Star 2A-0941600 Pilot Runner Tube 0.79 mm orifice is a small gas-control component designed for use with runner tubes used in commercial cooking equipment. Its primary function is to precisely regulate the amount of gas flowing to the pilot assem...

The Star Mfg 2NZ11215 Oven Heating Element is an electric heating component designed to provide steady thermal output used in commercial systems. Rated at 208 volts and 800 watts, it works by converting electrical energy into radiant heat as current ...

The T&S Brass 0036H Flex Hose Pre-Rinse Hose Stainless Steel 36" provides durable and flexible water delivery for commercial kitchen equipment. Designed for use with compatible pre-rinse spray systems, this 36-inch stainless steel ...

The Star Mfg 8002 Speed Control Potentiometer provides precise motor speed adjustment to support consistent operation in commercial foodservice equipment. Manufactured by Star Manufacturing, this 120V potentiometer features white wire leads, an int...

The Hisense 251912 TV Main Board serves as the central control component that manages signal processing and overall television operation. This board receives input signals from connected sources and internal tuners, then processes the data to deliv...

The Beverage Air 203-126A Capillary Tube helps regulate refrigerant flow to maintain stable cooling performance in compatible refrigeration systems. This precision-sized tube is a narrow copper line with a 0.036" inner diameter, a 0.087" ou...

The Star Mfg WS506921 Oven Cast Iron Charbroiler is a durable radiant cooking component designed to distribute heat evenly in compatible parts used in commercial systems. Measuring 19" x 3-11/16", it sits above the burner where it absorbs a...

The T&S Brass 005312-40 Pedal Valve Bonnet Assembly provides reliable internal valve control for commercial kitchen equipment. Designed as a replacement component for compatible pedal-operated faucet systems, this bonnet assembly hel...