Kitchen Appliances Advertising Ads – Free Classified Ads
The Vulcan Hart VH00-421506-000G1 Range Rear Stepup Burner provides reliable and efficient heat for commercial cooking applications. This burner is designed to fit at the rear of compatible ranges, delivering consistent flame control to support vario...
The Adcraft RX-2-24 Fryer Thermostat is a durable temperature control component designed to regulate heat in commercial deep fryers, ensuring safe and consistent cooking performance. Operating within a range of 200°F to 400°F, it ...
The Vulcan Hart VH00-421790-00001 Oven Overlay Control Panel SG4D is a user-interface component designed to streamline the operation of compatible commercial ovens. This overlay control panel allows kitchen staff to easily access and manage cooking ...
The Vulcan Hart VH00-423758-00001 Oven Door Trim Access is a precision-engineered replacement component designed to restore and maintain the structural integrity and appearance of compatible commercial oven doors. This trim piece functions by securi...
General Electric WB21X22134 Sensor Assembly: Precision Temperature Control for GE Ovens The General Electric WB21X22134 Sensor Assembly is a genuine OEM temperature sensor specifically engineered for GE oven ranges and wall ovens. Typically i...
The Vulcan Hart VH00-423766-000G1 Oven Bottom Trim Assembly is a replacement component designed to support and protect the lower section of compatible commercial ovens. It functions as a durable barrier that helps shield internal components from debr...
The Vulcan Hart VH00-423767-000G2 Oven Burner Assembly SG6 provides dependable heat generation for efficient oven operation in commercial kitchen settings. This component is responsible for mixing gas with air and delivering a controlled flame to mai...
The General Electric MWFP Water Filter is a premium, NSF-certified refrigerator water filter designed for select GE side-by-side and bottom-freezer refrigerators. This filter, typically employing an advanced carbon block media, works by physicall...
The Vulcan Hart VH00-423842-000G1 Oven Door Seal Set (Left and Right) ensures an effective and secure seal for commercial oven doors, helping to maintain optimal cooking temperatures and energy efficiency. Designed to fit precisely, these seals preve...
The Robot Coupe 29061 Hinge Pin Bushing is a small yet crucial mechanical component designed to provide smooth and durable pivoting action for various covers and attachments on commercial food processors. This bushing functions by creati...
The Everest SS19-01 Interior Light Switch (PDS020) is a genuine OEM door-activated switch engineered for Everest refrigeration units. Compact in design (~2.05″ × 1.4″ × 0.7″, ~0.025 lb), it securely mounts insi...
The Pitco PTP6072186 Fryer Tube Screen is designed to help maintain cleaner oil and improve fryer performance by trapping food particles and debris before they reach the burner tubes. Measuring 17-1/2" x 17-1/2", this screen fits ...
The Everest SHC01-00 Wire Shelf/Rack (24″ × 23¼″) is a durable, epoxy-coated OEM shelving solution designed for use in Everest refrigeration units. Constructed from high-strength steel and finished with a food-safe e...
The Pitco PT60127601 Fryer Flare Swivel Gas Connector provides a secure and flexible connection between gas supply lines and fryer units, supporting safe and efficient gas flow. Featuring a 1/2" MPT x 15/16" fitting, this connecto...
The Everest RS02-00 Evaporator Coil Sensor features a grey-wire sheath and is a genuine OEM probe engineered for accurate temperature sensing in Everest refrigeration units. Measuring approximately 3.95 in × 3.8 in × 0.85 in and wei...
Looking for the perfect everyday bottle? Discover the durable and Insulated Standard Mouth Bottle with Flex Cap at Hydro Flask Nigeria. Ideal for work, travel, or adventure, keeps drinks cold for 24 hours and hot for 12 hours. Shop now for reliable, ...
The Prince Castle 35586S Pusher Plate is a replacement part designed to ensure consistent and efficient operation of compatible food prep equipment. It functions by applying even pressure to food items during slicing or portioning, helpi...
The Everest RS01-00 Temperature Sensor Cabinet features a purple wire and is a genuine OEM probe designed for precise temperature monitoring in Everest refrigeration units. Housed in a sealed stainless or brass sheath (approx. 4 in length), the se...
The Pitco PP10945 3/8" Brass Ball Valve offers a reliable solution for controlling fluid flow in commercial kitchen equipment and similar applications. Designed to handle pressures up to 150 WSP and 600 WOG, this valve ensures safe and...
The Everest PR01-00 Power Relay (115V) is a genuine OEM component engineered for use with Carel control PCBs in Everest refrigeration and HVAC systems. Compact and efficient (approx. 3″ × 2.4″ × 1.75″, 0.21 lb), it handl...
The Pitco P6071516 Pull Handle is a durable replacement component designed specifically for fryers with 2-3/4" and 3" center spacing, ensuring smooth and efficient basket operation. Designed for compatibility and ease of use, thi...
The Everest PCB31-00R Refrigeration Controller (Carel IR33, 115V) is a genuine OEM control board designed for precise temperature regulation in Everest commercial refrigeration units. Compact and rugged, it manages compressor cycles, defrost functio...
Looking for a high-end kitchen makeover? Awesome Kitchens delivers beautifully crafted designer kitchens that combine style, function, and durability. Our design team works closely with you to create a space that reflects your taste, whether it&a...
The Everest PCB31-00F Freezer Controller (Carel IR33, 115V) is a genuine OEM control board designed for select Everest commercial freezers. It accurately regulates internal temperature by managing compressor cycles, fan operation, and defrost eve...
The Everest PCB28‑00F is a genuine OEM freezer controller engineered for select Everest commercial units. Housed on a rugged, factory‑programmed board, it precisely governs compressor cycles, defrost timing, and fan operation to maintain st...
The Vulcan Hart VH00-425324-00001 Oven Switch Mounting Bracket SG4/6 ensures secure positioning of the oven switch, promoting consistent and reliable oven performance. This bracket is designed to hold the switch firmly in place within the oven assem...
The Everest PCB17‑01 Retrofit Kit (Carel PYBU1R05) is a genuine OEM control upgrade for select Everest commercial refrigerators. Housed in a rugged enclosure, the Carel PCB precisely governs temperature, defrost cycles, and fan speed, restoring f...
The Vulcan Hart VH00-426600-000G1 Fryer Roller Guide Assembly ensures smooth and precise movement of fryer baskets for consistent cooking results. This guide assembly works by supporting and aligning the baskets as they slide in and out of the fryer,...
The Vulcan Hart VH00-426606-000G8 Basket Scrap Portable Filter effectively captures food particles to prevent grease trap blockages in commercial kitchens. This portable basket filter is designed to fit inside grease traps, where it traps solid waste...
The Everest EM11-00 Aluminum Fan Blade is a 180 mm, five-blade OEM component engineered for efficient airflow in Everest refrigeration systems. Made from lightweight, corrosion-resistant aluminum, it reduces motor strain while delivering quiet,...
The Vulcan Hart VH00-427753-000G2 Wiring Harness Assembly Interface CCS ensures accurate and organized electrical connectivity within compatible commercial kitchen equipment. This component functions as an interface that links the control system to v...
The Everest EM09‑00 Fan Motor is a compact yet robust OEM condenser fan motor, delivering 10 W of power through a 2‑pole, counter‑clockwise (CCW) configuration—compatible with 208 V–230 V systems. Designed for reach‑in r...
The Everest EM02‑02 Evaporator Fan Motor is a high-efficiency OEM replacement designed for refrigeration and HVAC evaporator systems. Rated at 4 W, 115 V/60 Hz, and featuring a two-pole counter-clockwise rotation, this compact motor draw...
The Everest EC07‑00 Evaporator Coil (3/8″ × 4‑Row × 9‑Fin × 310 mm) is a high-efficiency OEM component engineered for Everest freezer units. Built with durable copper tubing and aluminum fins, it ensures optimal he...
The Everest DS05‑00 Shaft (Bottom Hinge) is a durable OEM replacement component engineered for the bottom hinge of Everest commercial refrigeration doors. Measuring approximately 5.15″ × 2.95″ × 1.05″ and weighing 0.13...
The Nemco 45457 Foot is a replacement support component designed to provide stability and proper leveling for compatible commercial kitchen equipment. This durable foot attaches to the base of the unit, helping to keep it balanced on a va...
The Lincoln 369603 Stepper Motor & Gearbox Assembly is designed to provide precise, controlled motion for commercial kitchen equipment, ensuring accurate and reliable mechanical performance. This assembly combines a stepper motor with a...
The Vulcan Hart VH00-428691-00002 Fryer Solenoid Valve Hot Oil controls the flow of hot oil within commercial fryers, ensuring safe and precise operation. This solenoid valve operates by electronically opening and closing to regulate oil circulation,...
The Middleby Marshall 60679 HNYW L Gas Valve Assembly is crucial for precise and safe gas flow control in compatible commercial ovens. This specialized valve assembly regulates the supply of gas to the burner, ensuring optimal combustion ...
The Middleby Marshall 58504 Digital Temperature Controller provides reliable and accurate temperature management for commercial cooking equipment, helping maintain consistent cooking conditions. This component operates by monitoring interna...
The Middleby Marshall 28071-0028 Digital Temperature Controller ensures precise and consistent heat regulation in compatible commercial ovens. This advanced controller operates by receiving input from a temperature sensor within the oven ...
The Vulcan Hart VH00-497489-00001 Hotplates Step Up Burner Spacer ensures proper alignment and spacing of burners within commercial hotplates, promoting efficient heat distribution and safe operation. This burner spacer works by maintaining the corre...
The Vulcan Hart VH00-497566-000G2 Fryer Drain Pipe Left Hand GR85F is designed to facilitate the safe and efficient removal of used oil from commercial fryers. This left-hand drain pipe channels oil away from the fryer basin, supporting proper draina...
The Vulcan Hart VH00-497850-00003 Burner Brick Bracket provides stable and secure support for burner bricks within commercial cooking equipment, helping maintain proper burner alignment and heat distribution. Designed to hold bricks in place during h...
The Everest DG09‑00 Door Gasket (28″ × 25″) is a high-quality OEM replacement designed for the right-side door of Everest commercial refrigeration units. Made from durable, USDA/NSF-approved PVC with integrated magnetic strips, it...
The Vulcan Hart VH00-498028 Range Tee Compression fitting is a reliable connector designed to join a 3/8" NPT threaded connection to a 3/8" compression fitting, ensuring a secure and leak-resistant seal in commercial kitchen gas lines. Engi...
The Everest DG01‑00 Full Door Gasket is a genuine 27" × 57" OEM seal engineered for Everest reach‑in refrigerators and freezers. Its four‑lip magnetic PVC profile snaps into the factory retainer, creating an airtight bar...
The Vulcan Hart VH00-499085-00002 Fryer Insert Fabric Envelope is a genuine OEM component designed to enhance oil filtration in commercial fryers. This envelope-style filter, measuring 11" x 15", serves as a containment for the KleenScreen ...
The Everest CF08‑00 4‑Pole Fan Motor (8 W, 208–230 V) is a genuine OEM refrigeration component engineered for use in Everest condenser and evaporator units. This compact motor delivers reliable 8-watt power across 4 poles, enabling ...
The Vulcan Hart VH00-499087-00001 Screen Fine Mesh Filter is a genuine OEM component designed to enhance the performance of Vulcan commercial cooking equipment. This fine mesh filter effectively captures small particles, such as food crumbs and grea...