Kitchen Appliances Advertising Ads – Free Classified Ads

The Blodgett 36605 33" Orange Spark Wire ensures reliable ignition by delivering electrical current to burner components in Commercial Kitchen Equipment. Designed with a 90° boot, this spark wire connects the ignition system to the...

The Blodgett 07839 Oven Direct Vent Draft Hood is designed to channel combustion gases and heat safely away from the oven cavity in commercial systems. Mounted above the oven flue outlet, it directs exhaust gases into a ventilation system, helping ma...

The Allpoints 851158 Fiberglass Sleeve provides reliable insulation and protection for wires and cables in high-temperature environments. Designed as a durable 3/8-inch fiberglass sleeve with a 100-foot length, it acts as a thermal barrier that hel...

The Panasonic FFV3702220S Vent Fan Motor provides proper airflow to support ventilation performance in compatible exhaust fan units. This motor is used as a replacement component that drives the fan blade, allowing air to be moved out of enclosed ...

The Vulcan Hart 00-411499-00004 Buzzer, 115V, provides a dependable audible alert for commercial kitchen equipment, ensuring staff are promptly notified of important events. Operating at 115 volts, it produces a clear and consistent sound when trigge...

The Hatco 02.08.117.00 Warmer Element 208V 1725W is an electric heating component designed for commercial warmers, delivering 1725 watts of power at 208 volts for steady performance. It works by passing electrical current through a resistive elem...

The Blodgett 11476 KTK-R-20 Fuse provides critical overcurrent protection for Commercial Kitchen Equipment, helping prevent electrical damage and unsafe conditions. Rated at 600V and 20 amps, this fuse is designed to interrupt the electrica...

The Vulcan Hart 00-411499-00002 Buzzer, 115V, provides a clear and reliable audible alert for commercial kitchen equipment, helping operators respond promptly to operational signals. This buzzer works by emitting a consistent sound when triggered by ...

The Allpoints 261292 flange nipple kit provides a secure and reliable connection point for plumbing or gas line installations. This kit typically includes a threaded nipple and matching flange, designed to join piping components while offering stable...

The Panasonic FFV3700297S Bath Fan Motor provides reliable airflow by driving the ventilation system in compatible bathroom exhaust units. This motor is a replacement component that powers the fan blade to move air out of the room, helping regulate...

The Char-Broil G474-0017-W2 Infrared Grill Cooking Grate provides consistent heat distribution for more controlled and even grilling results. This component is a matte porcelain-coated cast iron cooking grate, measuring approximately 193mm x 432mm, d...

The Blodgett 5906 Micro Switch 20A controls electrical circuits by opening or closing connections based on mechanical movement used in commercial systems. Rated for 20 amps, this switch activates when a lever or actuator is engaged, allowing or inter...

The Panasonic FFV11FL1K070 LED Unit provides illumination for compatible ventilation fan systems, supporting clear visibility during operation. This LED unit is used as an internal lighting component, designed to fit within the fan housing and inte...

The Hatco 02.06.450.00 Sink Heater Element is an electric heating component designed with a 2-1/2" square flange, 1-3/4" on-center bolt holes, and a round gasket for secure installation and proper sealing. Operating at 208V and 4500W, it ...

The Allpoints 261198 stem adapter enables secure and efficient connection between compatible control components, supporting proper equipment operation. This adapter is designed to link valve stems or control shafts with handles or other interfacing ...

The Groen 009046 Valve Draw-Off 2" is designed to control the release of liquid contents from cooking vessels that is used in commercial systems. This valve installs at the outlet of the unit and operates by opening or closing an internal passag...

The Groen 098444 LP Gas Valve provides precise control of propane gas flow for safe and efficient operation in commercial kitchen equipment. Designed to regulate gas delivery to burners, it ensures consistent heat output for reliable cook...

The Hobart 277983-2 Dishwasher 3" Round Flange Immersion Element with 3" Round Rubber Gasket delivers reliable and efficient heating for commercial dishwashing applications. Designed for 200/240V, 3-phase systems, it provides 5000 to 7200 w...

The Frigidaire EWF01 Refrigerator Electrolux Water Filter supports clean water flow and proper filtration in compatible side-by-side refrigerators. This filter is used to reduce common impurities from the water supply before it reaches the dispe...

The Allpoints 521124 gas valve offers precise control of gas flow for reliable appliance performance. Featuring a 1/8" MPT inlet and a #42 orifice, this component regulates the amount of gas delivered to burners by controlling flow through a cal...

The Groen 146880 1/15 HP Motor Assembly provides reliable mechanical operation for moving components within commercial kitchen equipment. This motor assembly is designed to power internal functions such as circulation or agitation, dependi...

The Hobart 00‑315013 Dolly Mixing Bowl is a purpose‑built support dolly designed to transport 60 qt, 80 qt, and 140 qt commercial mixer bowls with ease. Ideal for high‑volume kitchens, bakeries, and food production facilities, it signific...

The Hatco 02.06.300.00 Sink Heater Element is a high-performance electric heating component designed with a 2-1/2" square flange mount and 1-3/4" on-center bolt holes for secure installation. Operating at 3000W and 208V, it works by conve...

The Allpoints 521114 two-stage gas regulator provides reliable pressure control for commercial gas appliances, helping ensure consistent and safe operation. Designed with 1/4" x 1/2" connections and a capacity of up to 275,000 BTU, this reg...

The Frigidaire EPTWFU01 Refrigerator Water & Ice Filter provides clean and filtered water by reducing common impurities in compatible refrigerator systems. This filter is installed inside the refrigerator’s designated filter housing, typi...

The Comark ATT50 Immersion Probe K-Type is a durable temperature probe designed to be used with compatible K-type thermometers, delivering a wide measurement range from -40° to 1550°F. It works by inserting the probe tip directly into the su...

The Hatco R02.04.500.00 Booster Element is a high-capacity heating component designed for use in commercial booster water heaters, featuring a 1-3/4" on-center configuration with a 2-1/2" flange for secure installation. It works by conver...

The Groen 119823 Fuse 6A provides essential electrical protection by safeguarding circuits in commercial kitchen equipment from overcurrent conditions. Designed to handle up to 6 amps, this fuse works by interrupting the electrical flow whe...

The Whirlpool EDR5RXD1 Refrigerator Water Filter 5 provides filtered water by reducing common contaminants in compatible refrigerator systems. This replacement filter is installed inside the refrigerator compartment, typically in the grille or uppe...

The Allpoints 521054 Twin Adjustable Gas Filter provides effective filtration to help maintain clean and consistent gas flow in equipment systems. Designed with a 1/8" MPT connection and a 50-micron filtration level, it works by trapping fine pa...

The Henny Penny 65466 Fry Basket is designed to support efficient and consistent frying in commercial kitchen environments. It holds food securely while allowing hot oil to circulate evenly, helping achieve uniform cooking results. Built with durable...

The Hatco 02.04.500.00 Booster Element is a high-performance heating component designed for booster water heaters, featuring a 2-1/2" square flange with 1-3/4" on-center bolt holes for secure installation. Operating at high wattage, it co...

The Blodgett 4589 Oven Gas Pressure Regulator controls and maintains consistent level supplied to  burners used in commercial systems. Designed with a 3/4-inch connection, it regulates incoming natural gas pressure within a range of 3 to 6 inche...

The Whirlpool EDR3RXD1 Refrigerator Water Filter 3 provides filtered water by reducing common contaminants in compatible refrigerator systems. This filter is used within the internal water filtration housing to support clean water flow for drinking...

The Allpoints 521028 3/4" NAT Pressure Regulator ensures stable and reliable gas pressure control for compatible equipment. Designed to regulate natural gas flow within a 3"–6" WC range, it works by automatically adjusting inter...

The Imperial 28299 Fryer Conversion Kit provides a practical solution for adapting commercial fryers to a different fuel type, ensuring continued performance and compatibility. This kit includes the necessary components to safely convert the fryer&r...

The Groen Z009752 Stripe Tube Glass is used to provide a clear visual indication of liquid levels in commercial kitchen equipment. Featuring a red and white striped design, this glass tube is installed within a gauge assembly to help operat...

The Hatco 02-12-003 motor/blower assembly delivers steady airflow to help maintain safe operating temperatures in commercial equipment. This component features a 115V, 60Hz motor integrated with a 4-blade cooling fan, designed to circulate air withi...

The Duke 600541 Oven 3 Heat Switch Rotary Switch W/ 6 Term, D Stem & .150" Flat Down is designed to regulate heating settings in compatible commercial ovens. This rotary switch features three selectable heat positions and six terminals, al...

The Allpoints 261420 50 FT Aluminum Tubing, 5/16" OD provides a flexible and reliable pathway for transporting air, liquids, or compatible gases in various applications. This aluminum tubing functions by allowing controlled flow through its ...

The Hatco 02.08.120D.00 Warmer Element 208V 2050W provides consistent heat output to maintain proper food holding temperatures in commercial warming equipment. This heating element is designed as a replacement component that generates heat when ele...

The Pitco AFR21-0017-01 Fryer Pucks are designed to help support routine fryer maintenance and cleaning in commercial kitchen equipment. Supplied in a pack of five, these pucks are used during the fryer cleaning process to help break dow...

The AllPoints 511257 Thermopile 60' 2 Lead W/Pg9 Adapt provides reliable thermal sensing to help control and maintain safe operation in gas-powered commercial equipment. Designed as a thermopile generator, it works by converting heat from the...

The LG EBR85624963 Refrigerator PCB Main Control Board is an electronic control component used to regulate and coordinate key refrigerator functions. This PCB assembly operates as the central circuit board that receives signals from sensors and se...

The Allpoints 511280 Pilot Assembly is a replacement part used in gas-powered appliances to generate and maintain a steady pilot flame, which ignites the main burner when needed. It works by delivering a controlled flow of gas through the pilot orifi...

The Pitco P8903-41 Natural Gas Pressure Regulator controls and stabilizes power supplied to burners used in commercial systems. Designed for natural gas applications, the regulator maintains a standard outlet pressure of 3.5 inches water column and ...

The Globe MCR75 Slicing Machine Relay 8A 250V is a reliable electrical component designed to control and protect the operation of compatible slicing machines. This relay acts as an automatic switch that manages electrical flow within the machine, a...

The Allpoints 511130 72" Coaxial Thermocouple with 11/32"-32 threads provides reliable flame sensing for gas-powered commercial cooking equipment. Designed as a temperature-sensing safety component, it works by generating a small electrical...

The Pitco P6072344 Fryer Wire/Glass Screen Donut is designed to help control splatter and improve safety during frying operations in commercial kitchen equipment. Measuring 24" x 34" and equipped with handles, this screen is place...

The Garland 1955501 Oven Control Board helps maintain accurate oven temperatures between 150°F and 500°F for consistent cooking results in commercial kitchen equipment. It is an electronic control component designed to regulate and manage the...