Baso H17CB-3 Pilot Valve With No Interrupter 3/8 Inch
Location: (Chicagoi)
The Baso H17CB-3 Pilot Valve with No Interrupter (3/8 inch) is a reliable, high-quality control component designed for use in gas-fired heating equipment. Built for durability and consistent performance, it provides smooth and steady gas flow to the pilot burner, ensuring dependable ignition and operation. Its 3/8-inch connection offers easy integration into a wide range of systems, making it suitable for both residential and commercial applications. With a no-interrupter design, this pilot valve helps maintain continuous functionality, delivering safety, efficiency, and long-lasting service in demanding environments.
For an efficient and reliable HVAC system, the Baso Pilot Valve is a great choice for optimal system performance.
#H17CB-3, #Baso, #Pilot Valve, #PartsHnC, #PartsHnCBuzz, #HVACParts, #FurnaceParts, #AirConditionerParts
Website
Email
8667730907 
The Siemens S55180-A157 N/C Zone Valve Actuator (Non-Spring Return, 24 VAC, 0-10 VDC) is an electronic actuator that modulates zone valves in HVAC hydronic systems. It operates by converting a 0-10 V control signal into precise valve positioning,...
The ClimateMaster S17S0001N05 Heat Pump Control Board is an OEM control board designed for ClimateMaster and compatible heat pump HVAC systems. It acts as the central controller, interpreting thermostat and sensor inputs to manage compr...
The ClimateMaster S14S0016N01 1 HP Blower Motor is a robust electric motor designed for HVAC systems, including air handlers and geothermal units. Operating at 1250 RPM with 120–240 V single-phase power, it drives the blower to circulate co...
The York S1-6257916 1/2" Natural Gas Valve is a precision control valve for HVAC systems, including furnaces and boilers. It regulates the flow of natural gas to the burner by responding to thermostat and control signals, ensuring consistent...
The York S1-3500-412P/A 11.2 kW Heater Element with Limits is a high-capacity electric heating component for HVAC systems such as air handlers and heat pumps. Operating at 240 V, it generates heat through resistance elements and integrates safety...
The York S1-028-15229-000 Condensate Drain Assembly is a drainage component for HVAC systems, including air conditioners, heat pumps, and furnaces. It collects and channels condensate produced during cooling or heating cycles away from the unit t...
The York S1‑026‑35590‑000 Motor Arm Mount is a genuine OEM bracket used in York HVAC systems to securely attach a blower or condenser motor to its mounting arm. It stabilizes the motor assembly, minimizing vibration and misalignment while t...
_thumb.jpg)
The York S1-025-29041-005 Auto Limit Switch (3″ Insert, 110°F–140°F) is a temperature-regulated safety control that automatically opens or closes its contacts within the specified range to protect HVAC systems. It senses heat ...
The York S1-025-35354-000 Flame Sensor is a critical safety component designed to detect the presence of a burner flame in gas-fired HVAC systems. It works by sensing the flame through electrical conductivity, sending a signal to the control board ...
Top On Sale Product Recommendations! Portable Tiny SA Spectrum Analyzer Upgraded V0.3.1 Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input Signal Generator Price Now: USD 46.11 (Original price: USD 50.22, 8% off) Click & Buy: ht...
The York S1-025-18452-700 Foot Mount Transformer is a reliable electrical component for HVAC systems, converting 208–240V primary power to 24V secondary output at 40 VA. Used in air handlers, furnaces, and control circuits, it provides sta...
York S1-024-35272-000 is an SPNO close-on-fall pressure switch set at –0.54 inches water column, designed to ensure safe airflow and draft control in HVAC systems. The switch functions by sensing pressure changes and closing the normally o...
The York S1-024-24116-000 SPDT Relay Control (24 V) is a single-pole, double-throw control relay that manages electrical circuits in HVAC equipment by switching contacts when energized with a 24 V signal. It enables precise activation of compone...
Quartz infrared electric heating elements are used in immersion heating applications where fast response, stable radiant heat, and clean operation are required. Process Technology supplies quartz infrared elements designed for industrial environment...
The Maxitrol RV48CL-3/4 Gas Pressure Regulator is a high-capacity regulator for HVAC systems, including furnaces, boilers, and commercial heaters. It maintains consistent gas pressure (5" WC for natural gas, 10" WC for propane) to the bur...
The Nordyne 1003442 Inducer Motor Assembly is a genuine OEM replacement inducer motor assembly designed for use in Nordyne gas furnaces and HVAC systems. It helps create and maintain proper combustion airflow by drawing air into the furnace and expel...
The Maxitrol RV48-3/4 Gas Pressure Regulator is a durable, aluminum-bodied regulator designed for HVAC systems such as furnaces and boilers. Featuring a 3/4" NPT connection and 250K BTU capacity with a 3–6" WC spring, it maintai...
Maxitrol RV53-1 is a 1-inch straight-thru-flow gas pressure regulator designed to deliver stable outlet pressure from 3 to 6 inches W.C. with a maximum inlet pressure of 1/2 PSI. The regulator works by modulating an internal diaphragm and valve t...
Process Technology supplies industrial heaters online for manufacturers and processors that require stable, dependable heating in real operating environments. Our range includes immersion heaters, inline heaters, flange heaters, and high-purity heati...
Furnace Installation in Bayside, WI | Heating Installation | Gas Furnace Installation; Keep your home warm & cozy with furnace installation in Bayside, WI by Burkhardt Heating, Cooling, Plumbing & Electric. Call us for expert heater installat...